EnGenius ESR600

multiple revisions of this device, use caution

abgn (AN600)
Dual Band Wireless N600 Gigabit Cloud Router
WikiDevi.wi-cat.ru	EnGenius ESR600
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Partial Support
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	EnGenius ESR600
FCC ID	A8JESR600
IC ID	10103A-ESR600
Type	wireless router
CPU1 Y	MediaTek MT7620A
CPU1 Type	MIPS 24KEc
CPU1 Speed	580 MHz 32-bit
Flash1 Chip	Macronix MX25L12845EMI-10G
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	Nanya NT5TU32M16DG-AC
ETH chip1	MediaTek MT7620A
Switch	Atheros AR8327
Ethernet Port Count	1-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1.25 A
Connector type	barrel
Serial Port (UART)	yes, 3.3V TTL, (115200 8N1)
Other
Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 825 additional devices of which 26 are EnGenius devices Default login user: admin Default login password: admin admin:admin credentials used by 1358 additional devices of which 49 are EnGenius devices
Manuf/OEM/ODM	Senao
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
Availability	End of Life
FCC approval date	13 June 2013
(Est.) release date	07 June 2013
ASIN	B00CIE0QP0
Country of manuf	Taiwan
Radio 1
Chip1	MediaTek MT7620A
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Ralink RT5592
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand EnGenius ESR600 MediaTek MediaTek Ralink EnGenius ESR600H Ralink Ralink Ralink

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented EnGenius devices with specifications, see EnGenius.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = AN600 class

Overview

"ESR600-0.20 LFP" is silkscreened on the board in the FCC photos.

The Flash chip appears to be a MX25L12845EMI-10G.

The default SSID pattern (for both bands?) may be EnGeniusXXXXXX.

The power adapter shown in the FCC external photos is a

Shenzhen Gongjin Electronics S24B17-120A125-04

(100-240VAC ~ 50/60Hz, 0.7A max. -> 12VDC, 1.25A).

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: ramips
Subtarget: mt7620
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.2

Unsupported Functions:
LAN1, LAN2, WAN LED, 2.4GHz LED, see git-commit
LAN Hardware: Atheros AR8327
WLAN Hardware: MediaTek MT7620A, Ralink RT5592N
Installation method(s):
GUI OEM, see git-commit
Recovery method(s):
U-Boot TFTP + serial recovery, see git-commit

git • >>

ramips: add support for EnGenius ESR600 The EnGenius ESR600 is a dual band wireless router with a 4-port gigabit Ethernet switch, a gigabit Ethernet WAN port and a USB port. Specification: - Bootloader: U-Boot - SoC: MediaTek MT7620A (600 MHz) - Flash: 16MB, Macronix MX25L12845E - RAM: 64MB, Nanya NT5TU32M16DG-AC - Serial: 115200 baud, no header, 3.3V J2: Vcc (arrow), Gnd, Tx, Rx - USB: USB 2, 5V - Ethernet: 5 x 1 Gb/s 4 LAN 1 WAN, Atheros AR8327 - WiFi0: 5 GHz 802.11 b/g/n Ralink RT5592N 300 Mb/s, 2T2R - WiFi1: 2.4 GHz 802.11 b/g/n integrated 300 Mb/s, 2T2R - Antennas: 2 per radio, internal - LEDs: 1 programmable power (amber) 2 programable radio (blue) 1 programable WPS-5G (blue) 1 non-programable WAN activity (blue) 1 unconfigured WPS-2.4G (amber) - Buttons: GPIO: Reset, WPS Installation: Use the OEM web interface to install the ...-factory.dlf image. Use the OpenWRT ...-sysupgrade.bin image for future upgrades. The J2 serial port can be accessed either by soldering in a header, standard 0.1" spacing, or by using pogo-pins against the back side. As configured by the OEM, the U-Boot boot delay is short, however quickly typing "1" leads to the U-Boot "System load Linux to SDRAM via TFTP" prompt. The TFTP client is configured by default with client: 192.168.99.9 server: 192.168.99.8 filename: uImageESR600 It will load an OpenWRT initramfs kernel with this method. Known issues: 1) Only the ports externally labeled WAN, LAN3 and LAN4 are operational. LAN1 and LAN2 do not appear to power up. This issue is also present in the Lava LR25G001. 2) The amber WPS-2.4G LED, in the same lightguide as the blue WPS-5G LED, is not configured in the Device Tree specification. 3) The blue WAN activity LED is not configured in the Device Tree specification as this causes the AR8327 switch to fail to initialize.