Evaluation boards / unbranded boards WR512 3GN

bgn (N300)
access point
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Was Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Evaluation boards / unbranded boards WR512 3GN
FCC ID	none specified
Type	access point
CPU1	Ralink RT3052
CPU1 Type	MIPS 24KEc
CPU1 Speed	384 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Brand? Model?
ETH chip1	Ralink RT3052
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	5 VDC, ? A
Other
3rd Party Firmware Support	OpenWrt (Was)
Radio 1
Chip1	Ralink RT3052
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 12.09
Current supported version: 18.06.1
Comment:
aka "Sin Hon SH-WR512NU" or "WS-WR512N1"

4M Image build disabled in master with commit d7d46da938e3

Image too big: 19.07.10

Please insert instructions here