Flextronics MWB1305
From TechInfoDepot
Jump to navigationJump to search
| an (A300) | |||||
|---|---|---|---|---|---|
| access point,bridge | |||||
| WikiDevi.wi-cat.ru | Flextronics MWB1305 | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Status Unknown | ||||
| Tomato any flavor | Incompatible | ||||
| Platform | |||||
| Brand • Model • Rev | Flextronics MWB1305 | ||||
| FCC ID (fcc.io) | XQOMWB-1305 | ||||
| FCC ID (fcc.report) | XQOMWB-1305 | ||||
| IC ID | 5248U-MWB1305 | ||||
| Type | access point, bridge | ||||
| CPU1 | Celeno CL1300 | ||||
| CPU1 Type | MIPS 4KEc | ||||
| CPU1 Speed | not specified | ||||
| Flash1 Chip | Brand? Model? | ||||
| Flash1 Size | ? MiB | ||||
| RAM1 Size | ? MiB | ||||
| RAM1 Chip | Brand? Model? | ||||
| ETH chip1 | Celeno CL1300 | ||||
| ETH chip2 | IC+ IP101A | ||||
| Ethernet Port Count | 1-100MbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u | ||||
| Expansion IF types | none specified | ||||
| Power | 12 VDC, ? A | ||||
| Connector type | barrel | ||||
|
| |||||
|
| |||||
| Other | |||||
|
| |||||
| Manuf/OEM/ODM | Celeno VXT1300 | ||||
| Retail | |||||
| FCC approval date | 04 November 2009 | ||||
| Radio 1 | |||||
| Chip1 | Celeno CL1300 | ||||
| Chip2 | Maxim MAX2828 | ||||
| Chip3 | Maxim MAX2828 | ||||
| Wireless interface OUI | 00:0B:8C | ||||
| Antenna Connector Type | none specified | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11a/n | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Celeno (Ralink) chipsets with specifications, see Celeno.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Maxim chipsets with specifications, see Maxim.
For a list of all currently documented Flextronics devices with specifications, see Flextronics.
- • 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class
Overview
- The Celeno logo, "Patent Pending Celeno Proprietary", "CELENO VXT1300 AP", and "P/N BOARD: PCB00020" is silkscreened on the board in the FCC photos.
- Per the FCC test report, the device "utilizes 4 internal printed antennas: two transmit and two receive".
The FCC manual states the default IP is 10.0.0.2.
Categories:
- Flextronics
- Embedded system/access point
- Embedded system/bridge
- Embedded System Celeno
- Embedded System CL1300
- Celeno
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System IP101A
- Embedded System IC+
- IC+
- Manuf Celeno
- Embedded System Maxim
- Embedded System MAX2828
- Maxim
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation