GL.iNet GL-MT3000 (Beryl AX)
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX3000) | |
|---|---|
| WiFi 6 Travel Router | |
|
| |
| Homepage | Product page |
| WikiDevi.wi-cat.ru | GL.iNet GL-MT3000 (Beryl AX) |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | GL.iNet GL-MT3000 (Beryl AX) |
| FCC ID | 2AFIW-MT3000 |
| IC ID | 23019-MT3000 |
| Type | travel router |
| CPU1 | MediaTek MT7981BA |
| CPU1 Type | ARM Cortex-A53 |
| CPU1 Speed | 1.3 GHz ( 2 cores ) 64-bit |
| Flash1 Chip | Macronix MX35LF2GE4AD-Z41 |
| Flash1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (SLC NAND) |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR4) |
| RAM1 Chip | Nanya NT5AD256M16E4-JR |
| ETH chip1 | MediaTek MT7981BA |
| ETH chip2 | MaxLinear GPY211 |
| Ethernet Port Count |
1-2.5GbE-WAN 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab/3bz |
| Stock bootloader | U-Boot 2022.07-rc3 |
| Stock FW OS | Linux 5.4.211 OpenWrt 21.02-SNAPSHOT |
| Expansion IF types | USB 3.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 5 VDC, 3 A |
| Connector type | USB (Type C) Female |
| Serial Port (UART) | yes, 4-pin header, unpopulated, 3.3V TTL, (115200 8N1) |
|
Flags: | |
|
| |
| Other | |
|
Default SSID: GL-MT3000-XXX | |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| FCC approval date | 19 January 2023 |
| (Est.) release date | December 2022 |
| (Est.) initial retail price (in USD): | $99 |
| UPC |
6971131383086 (UPC DB, On eBay) |
| Newegg | 9SIAP8BK669665 |
| ASIN |
B0BPSGJN7T |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | MediaTek MT7981BA |
| Chip2 | MediaTek MT7976CN |
| Wireless interface OUI | 94:83:C4 |
| Antenna Connector Type | U.FL |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n/ax |
| 802.11ax | up to 574 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | MediaTek MT7981BA |
| Chip2 | MediaTek MT7976CN |
| Wireless interface OUI | 94:83:C4 |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n/ac/ax |
| AX-QAM | up to 2402 Mbps |
| 802.11ax | up to 1201 Mbps |
| 802.11ac | up to 867 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented MaxLinear (Intel) chipsets with specifications, see MaxLinear (Intel).
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented GL.iNet devices with specifications, see GL.iNet.
Overview
"MT3000-V1.2" and "2023/03/08" are silk-screened on board
Hardware specification
- CPU: MediaTek MT7981BA @1.3GHz (Filogic 820)
- SoC: Dual-core ARM (Cortex-A53)
- Storage: 256MB (SLC NAND) Flash
- Memory: 512MB (DDR4) RAM
- USB: 1x USB 3.0 port
- Wi-Fi: MediaTek MT7981BA/MT7976CN
- 802.11abgn/ac/ax Dual Band (2.4/5GHz)
- 2×2 2.4GHz + 3×3 (2×2 + Zero-wait DFS) 5GHz
- Network: 1x 2.5GbE (WAN), 1x 1GbE (LAN) ports
- Power Source: 5V/2A via USB Type-C
Links of Interest
Reviews
- GL.iNet GL-MT3000 pocket-sized Wi-Fi 6 Router review on CNX|Software
- GL-iNET Beryl AX GL-MT3000 Travel Router review on The Gadgeteer
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 23.05.2
Current supported version: 24.10.4
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 23.05.2
Current supported version: 24.10.4
LAN Comment: MaxLinear GPY211C 2.5Gbe Phy
Install Comment:
Flash OpenWrt 'sysupgrade' image from GL.iNet web UI, select do not keep settings Do not use 'factory' image to preserve GL U-boot.
Comment:
HFO, WED, and DSA all supported
Install Comment:
Flash OpenWrt 'sysupgrade' image from GL.iNet web UI, select do not keep settings Do not use 'factory' image to preserve GL U-boot.
Comment:
HFO, WED, and DSA all supported
Please insert instructions here
Pictures
See also
This article's use of red links may need cleanup. |
Models
Categories:
- GL.iNet
- Embedded system/travel router
- Embedded System MediaTek
- Embedded System MT7981BA
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System GPY211
- Embedded System MaxLinear
- MaxLinear
- OpenWrt Supported
- Embedded System MT7976CN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation