Gateworks Venice GW7301-01

multiple revisions of this device, use caution

abgn+ac (AC600)
Single Board Computer
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Gateworks Venice GW7301-01
FCC ID	none specified
Type	single-board computer
CPU1 Y	NXP i.MX8MM
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.6 GHz ( 4 cores )
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB (eMMC)
RAM1 Size	4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br />
RAM1 Chip	Brand? Model?
ETH chip1	Brand? Model?
Ethernet Port Count	2-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	microSDHC, Mini PCIe, SIM, USB 2.0, USB OTG
SIM Card slot	1
Mini PCIe slots	3
USB ports	2
SD/MMC Slots	1
USB Hub Compatible	Untested
PoE	802.3at, standard
Power	8-60 VDC, ? A
Connector type	barrel
Serial Port (UART)	yes, 3.3V TTL, (115200 8N1)
Flags: Bluetooth 5.0
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	Infineon CYW4373E
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Infineon CYW4373E
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 433 Mbps
802.11n	up to 150 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand Gateworks Venice GW7300-00 NXP Gateworks Venice GW7300-20 NXP Gateworks Venice GW7301-01 NXP Infineon Infineon Gateworks Venice GW7301-21 NXP Infineon Infineon

For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.

For a list of all currently documented Gateworks devices with specifications, see Gateworks.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.),

• 433 Mbps - 1SS 5GHz 802.11ac (80MHz chan.) = AC600 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: imx
Subtarget: cortexa53
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 24.10.0
Current supported version: 24.10.4

WLAN Hardware: Infineon CYW4373E
WLAN Comment: 1x1:1 MIMO
Installation method(s):
see git-commit
Comment:
u-blox GPS Receiver with MMCX Antenna Connector and TPM 2.0 Security Element

git • >>

imx: add Gateworks Venice support Add support for Gateworks Venice imx8m family of boards: - required kernel modules for on-board devices - image generation - initial network config - sysupgrade support The resulting compressed disk image (bin/targets/imx/cortexa53/openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz) can be installed on a Gateworks venice board via U-Boot: u-boot=> tftpboot $loadaddr openwrt-imx-cortexa53-gateworks_venice-squashfs-img.gz && \ gzwrite mmc $dev $loadaddr $filesize WARNING: this will overwrite any boot firmware on the eMMC user hardware partition which if being used will brick your board requiring JTAG to re-program boot firmware and recover The compressed disk image contains the partition table and filesystems only and that it is expected that boot firmware is installed properly on the eMMC boot0 hardware partition. The easiest way to ensure this is to use the Gateworks JTAG adapter/process to install the latest boot firmware as follows from a Linux host: wget http://dev.gateworks.com/jtag/jtag_usbv4 chmod +x jtag_usbv4 wget http://dev.gateworks.com/venice/images/firmware-venice-imx8mm.bin sudo ./jtag_usbv4 -p firmware-venice-imx8mm.bin