Gemtek WHRTC-100GW

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
Home Plug Wireless 802.11g Router
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Status Unknown
Platform
BrandModelRev Gemtek WHRTC-100GW
FCC ID MXF-HR930819G
Type wireless router, Powerline Access Point
CPU1 checkY Broadcom BCM4712
CPU1 Type BMIPS3300
CPU1 Speed 200 MHz
CPU2 Question? Conexant CX90010-11
Flash1 Chip Intel TE28F160C3BD70
Flash1 Size 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Broadcom BCM4712
Switch Marvell 88E6063
Ethernet Port Count 1-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 110-120 VAC ~ 50/60 Hz, 0.1 A
Connector type C7

Flags:
HomePlug 1.0

Other

Default SSID: default (101 addl. devices)
Default IP address: 10.0.0.2
the IP 10.0.0.2 is used by 9 additional devices
of which 0 are Gemtek devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1347 additional devices
of which 2 are Gemtek devices

Manuf/OEM/ODM Gemtek
Retail
FCC approval date 28 December 2004
Radio 1
Chip1 Broadcom BCM4712
Chip2 Broadcom BCM2050
Wireless interface OUI none specified
Antenna Connector Type none specified
Wireless Standard IEEE 802.11b/g
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio cor_rev 7
 FCC ID
TRENDnet TPL-111BRRYK-WHRB100
MXF-HR930819G

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Gemtek devices with specifications, see Gemtek.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"WHRTC-100GW_V03" and "ENG-103-8603" is silkscreened on the board in the FCC photos.

This device is using a SiGe SE2525L 2.4GHz power amplifier.

Default settings are per the FCC manual. They very well may be completely wrong.

The WWW interface's realm is noted as Wireless + HomePlug Design in the IE password prompt box for the web UI.

Links of Interest

Spec.