GlobalScale ESPRESSObin-Ultra

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
Single Board Computer
Homepage Product page
Support Support page
WikiDevi.wi-cat.ru GlobalScale ESPRESSObin Ultra
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev GlobalScale ESPRESSObin-Ultra V1.1.0
FCC ID YCJULTRA
Type single-board computer, CPE
CPU1 checkY Marvell 88F3720
CPU1 Type ARMv8 Cortex-A53
CPU1 Speed 1.2 GHz ( 2 cores ) 64bit
Flash1 Chip SanDisk SDINBDG4-8G
Flash1 Size 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMC)
Flash2 Chip Macronix MX25U3235F
Flash2 Size 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (SPI NOR)
RAM1 Size 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR4)
RAM1 Chip Samsung K4A8G165WB-BCRC
ETH chip1 Marvell 88F3720
ETH chip2 Marvell 88E1512
Switch Marvell 88E6341
Ethernet Port Count 1-1GbE-WAN
4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: F0:AD:4E (15 E, 1 W)
Ethernet OUI: F0:AD:4E (15 E, 1 W)

Stock bootloader U-Boot 2018.03
Stock FW OS Linux 5.4.53 Ubuntu 18.04
Expansion IF types M.2 (NGFF), Mini PCIe (USB), USB 3.0, USB 2.0
Mini PCIe slots 1
USB ports 2
SATA Ports 1
USB Hub Compatible Untested
PoE 802.3at, 802.3af, standard
Power 12 VDC, 2 A
Connector type barrel
5.5 mm (OD)
2.1 mm (ID)
9.5 mm (LEN)
Serial Port (UART) yes, USB Female (Micro-B), console, 3.3V TTL, (115200 8N1)
JTAG Port yes, 10-pad header, unpopulated, J1

Flags:
RTC w/ battery, Bluetooth 5.3, metal case, PoE in

Other

Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 254 additional devices
of which 7 are GlobalScale devices
Default login user: root
Default login password: admin
root:admin credentials used by 10 additional devices
of which 0 are GlobalScale devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 26 March 2020
(Est.) release date March 2020
(Est.) initial retail price (in USD): $160
Country of manuf Taiwan
Radio 1
Radio1 module Marvell W8997-M1218
Radio1 module IF Mini PCIe (M.2)
Chip1 Marvell 88W8997
Wireless interface OUI F0:AD:4E
Antenna Connector Type MHF4
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Radio2 module Marvell W8997-M1218
Radio2 module IF Mini PCIe (M.2)
Chip1 Marvell 88W8997
Wireless interface OUI F0:AD:4E
Antenna Connector Type MHF4
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
GlobalScale ESPRESSObin v5Marvell
GlobalScale ESPRESSObin v7Marvell
GlobalScale ESPRESSObin-UltraMarvellMarvellMarvell

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented GlobalScale devices with specifications, see GlobalScale.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Overview

"ESPRESSObin_Ultra_V1-1-0" is silkscreened on the board.

Hardware specification

Dual-core ARM (Cortex-A53)
  • Memory: 1GB (DDR4) SDRAM
  • Storage: 8GB (eMMC), 4MB (SPI NOR) Flash
M.2 2280 (Key B) slot for SATA SSD
  • Network: 5x 1Gb Ethernet ports
  • USB: 1x USB 2.0, 1x USB 3.0 ports
  • PCI: 1x mPCIe (USB 2.0) slot for 3G/4G modem
  • Power Source: 12V/2A via barrel or PoE (af/at)

Flashing

Flashing OpenWrt

Target: mvebu
Subtarget: cortexa53
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 21.02.0
Current supported version: 24.10.5
LAN Hardware: Marvell 88E6341 TOPAZ
WLAN Hardware: Marvell 88W8997
WLAN Comment: MIMO 2x2:2
Installation method(s):
see git-commit
git • >>
mvebu: add initial support for Globalscale ESPRESSObin-Ultra
This patch adds support for Globalscale ESPRESSObin-Ultra. Device uses
the same Armada-3720 SoC with extended hardware support.

- SoC: Armada-3720
- RAM: 1 GB DDR4
- Flash: 4MB SPI NOR (mx25u3235f) + 8 GB eMMC
- Ethernet: Topaz 6341 88e6341 (4x GB LAN + 1x WAN with 30W PoE)
- WiFI: 2x2 802.11ac Wi-Fi marvell (88w8997 PCIe+USB)
- 1x USB 2.0 port
- 1x USB 3.0 port
- 1x microSD slot
- 1x mini-PCIe slot (USB [with nano-sim slot])
- 1x mini-USB debug UART
- 1x RTC Clock and battery
- 1x reset button
- 1x power button
- 4x LED (RGBY)
- Optional 1x M.2 2280 slot

** Installation **

Copy dtb from build_dir to bin/ and run tftpserver there:
$ cp ./build_dir/target-aarch64_cortex-a53_musl/linux-mvebu_cortexa53/
linux-5.4.65/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dtb
bin/targets/mvebu/cortexa53/
$ in.tftpd -L -s bin/targets/mvebu/cortexa53/

Connect to the device UART via microUSB port on the back side and power on the device.

Power on the device and hit any key to stop the autoboot.

Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g:
$ setenv serverip 192.168.1.10 # Host
$ setenv ipaddr 192.168.1.15 # Device

Ping server to confirm network is working:
$ ping $serverip
Using neta@30000 device
host 192.168.1.15 is alive

Tftpboot the firmware:
$ tftpboot $kernel_addr_r openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-initramfs-kernel.bin
$ tftpboot $fdt_addr_r armada-3720-espressobin-ultra.dtb

Set the console and boot the image:
$ setenv bootargs $console
$ booti $kernel_addr_r - $fdt_addr_r

Once the initramfs is booted, transfer openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz
to /tmp dir on the device.

Gunzip and dd the image:
$ gunzip /tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz
$ dd if=/tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img of=/dev/mmcblk0 && sync

Reboot the device.

Pictures

User Images

See also

Models

SD-WAN/CPE
FCC ID: YCJULTRA (2020-03-26) Globalscale Technologies Inc.
Edge Gateways, Firewall and SBC
FCC ID: YCJ-ESPRESSOBIN (2020-11-18) Globalscale Technologies Inc.