HP t5335z
HP t5335z Smart Client | |
Support | |
---|---|
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
HP t5335z (XW887AT) |
Board ID |
316D64200009 |
Type |
thin client |
CPU1 |
Marvell 88AP510 |
CPU1 Type |
ARM v7 (PJ4 core) |
CPU1 Speed |
1.0 GHz |
GPU |
Vivante GC600 |
Flash1 Chip |
SK hynix H27U4G8F2DTR-BC |
Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
Flash2 Chip |
PcT Limited PCT25VF080B |
Flash2 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Serial(SPI)) |
RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR3 SDRAM) |
RAM1 Chip |
Micron MT41J256M8HX-15E:D x 4 |
ETH chip1 |
Marvell 88AP510 |
ETH chip2 |
Marvell 88E1318 |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
Stock bootloader |
U-Boot 2009.08 HP version: 5.4.2-V28 |
Stock FW OS |
Linux 2.6.32.9 |
Expansion IF types |
USB 2.0 |
USB ports |
4 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 3 A |
Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), P4 |
Flags: DVI, Audio out (3.5 mm), Audio in (3.5mm), RTC w/ battery | |
Additional chips | |
Other | |
Default IP address: acquired via DHCP | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
(Est.) release date | August 2011 |
(Est.) initial retail price (in USD): | $200 |
Newegg | 9SIA4MRJP57919 |
ASINs |
B005E81W6O B005E81W6O |
Country of manuf | China |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented HP device with specifications, see HP.
Overview
"PCB PN:316D64200009_R02", "HF-PCB;SBU,EMAG,MICRO CLIENT2,PV2",
- ",RC2_SI4,130*107mm", "T=1.6MM IMMERSION SILVER,6 LAYER", "©2011 HPC",
- "HP Engineering" are silkscreened on board bottom.
Hardware specification
- CPU: Marvell 88AP510 @1.0GHz ARM v7 (PJ4 core)
- GPU: Vivante GC600 (OpenGL 3.0, OpenGL ES 2.0, OpenVG)
- Storage: 512MB NAND Flash, 1MB SPI Serial Flash
- Memory: 1GB (DDR3) SDRAM
- Network: 1x Gigabit Ethernet port
- USB: 4x USB 2.0 ports
- Power: 12V/3A via barrel