Hi-Link HLK-RM04 v1
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Full Function Serial Network/Wireless Module | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Hi-Link HLK-RM04 v1 | ||||||||||||
FCC ID |
none specified | ||||||||||||
Type |
wireless router | ||||||||||||
CPU1 |
Ralink RT5350 | ||||||||||||
CPU1 Type |
MIPS 24KEc | ||||||||||||
CPU1 Speed |
360 MHz | ||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||
ETH chip1 |
Ralink RT5350 | ||||||||||||
Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Stock bootloader |
U-Boot | ||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||
USB ports |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Power |
3.9-5.5 VDC, ? A | ||||||||||||
Serial Port (UART) |
yes, (57600 8N1) | ||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support | |||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Ralink RT5350 | ||||||||||||
Wireless interface OUI |
none specified | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
MIMO status |
1x1:1 | ||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
802.11n |
up to 150 Mbps | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
|
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 19.07.10
Comment:
Image build disabled in master with commit d7d46da938e3
Image too big: snapshot
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 19.07.10
Comment:
Image build disabled in master with commit d7d46da938e3
Image too big: snapshot
Please insert instructions here