Huawei HG253s v2

bgn (N300)
Wireless ADSL2+ Router
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Partial Support
Tomato any flavor	Status Unknown
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Huawei HG253s v2
FCC ID	none specified
Type	wireless router, dsl modem
CPU1	Broadcom BCM6362
CPU1 Type	MIPS32
CPU1 Speed	400 MHz ( 2 cores )
Flash1 Chip	Spansion S34ML01G1
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	Micron MT47H64M16HR
ETH chip1	Broadcom BCM6362
Switch	Broadcom BCM53134
Ethernet Port Count	1-1GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	CFE 1.0.38 -114.174
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, internal, 4-pin header
Flags: ADSL2+
Other
Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 1 are Huawei devices
Manuf/OEM/ODM	Huawei
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
Availability	End of Life
Country of manuf	China
Radio 1
Chip1	Broadcom BCM6362
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Huawei device with specifications, see Huawei.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

See also: Huawei HHG2500

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bmips
OpenWrt Subtarget: bcm6362
OpenWrt Package architecture: mips_mips32
Support started version: 21.02.0
Current supported version: 23.05.5
Unsupported Functions:
DSL modem, FXS, WiFi 2.4GHz

Please insert instructions here

JTAG-Serial Info

Serial

boot log • >>

HELO CPUI L1CI HELO CPUI L1CI DRAM ---- PHYS ZQDN PHYE DINT LASY USYN MSYN LMBE PASS ---- ZBSS CODE DATA L12F MAIN NAN1 BT00 0002 NAN9 BT00 0244 NAN9 NAN3 RFS2 NAN5 CFE version 1.0.38-114.174 for BCM96362 (32bit,SP,BE) Build Date: Mon Jul 20 00:00:00 CST 2015 (root@localhost) Copyright (C) 2000-2011 Broadcom Corporation. NAND flash device: name Spansion S34ML01G1, id 0x01f1 block 128KB size 131072KB External switch id = 53125 Chip ID: BCM6362B0, MIPS: 400MHz, DDR: 333MHz, Bus: 166MHz Main Thread: TP0 Memory Test Passed Total Memory: 134217728 bytes (128MB) Boot Address: 0xb8000000 Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Boot image (0=latest, 1=previous) : 0 Board Id (0-11) : hg253s Number of MAC Addresses (1-32) : 10 Base MAC Address : 02:10:18:01:00:01 PSI Size (1-64) KBytes : 0 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Main Thread Number [0|1] : 0 Boot :e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0 *** Press any key to stop auto run (0 seconds) *** Auto run second count down: 0 ../../../cfe/arch/mips/board/bcm63xx_ram/src/bcm63xx_util.c 770 ATP_FLASHCBB_Read_With_ReservedBlock: blk_start = 0x000003F8, ulReservedBlockSize = 0x00000003 Boot from slave system! ../../../cfe/arch/mips/board/bcm63xx_ram/src/bcm63xx_util.c 770 ATP_FLASHCBB_Read_With_ReservedBlock: blk_start = 0x000003F8, ulReservedBlockSize = 0x00000003 SIGN CHK ALWAYLYS. get bootflag = 2 ../../../cfe/arch/mips/board/bcm63xx_ram/src/bcm63xx_cmd.c 3309 ATP_GetKernelTag: ulTagBlock = 239 ../../../cfe/arch/mips/board/bcm63xx_ram/src/bcm63xx_util.c 770 ATP_FLASHCBB_Read_With_ReservedBlock: blk_start = 0x000000EF, ulReservedBlockSize = 0x00000004 check tag at block 239 crc ok ../../../cfe/arch/mips/board/bcm63xx_ram/src/bcm63xx_cmd.c 3800 hw_check_image: pBase = 0xB9E80000, size = 0x01180000 ../../../cfe/arch/mips/board/bcm63xx_ram/src/bcm63xx_util.c 586 ATP_FLASHCBB_Read: start = 0xB9E80000, ulLen = 0x01180000 Check Image Crc Success Power down external PHY port. I have find vmlinux.lz at block 245 I have get vmlinux.lz size at block 259 Decompression OK! Entry at 0x803bc830 Closing network. no Disabling Switch ports. Flushing Receive Buffers... 0 buffers found. Closing DMA Channels. Starting program at 0x803bc830 init started: BusyBox vv1.9.1 () starting pid 290, tty '': '/etc/init.d/rcS' RCS DONE starting pid 291, tty '': '/bin/sh' BusyBox vv1.9.1 () built-in shell (ash) Enter 'help' for a list of built-in commands. boot start running profile... rootdir=/ table='/etc/devicetable' boot start running starbsp... mount config success mount coredump success mount oldconfig success boot running starbsp... -/bin/sh: cannot create /proc/tty/mode: nonexistent directory Loading drivers and kernel modules... boot running mic... INSMOD base START...... Start mic now ... GlobeMac Init OK load cfm ok. retry xhci retry xhci done ##sendmsg return 16, errno 0. INSMOD base Done read buffer: MemTotal: 123456 kB MemFree: 77788 kB Buffers: 0 kB Cached: 10032 kB SwapCached: 0 kB Active: 3488 kB Inactive: 8596 kB Active(anon): 2368 kB Inactive(anon): 0 kB Active(file): 1120 kB Inactive(file): 8596 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 2112 kB Mapped: 2200 kB Slab: 26996 kB SReclaimable: 152 kB SUnreclaim: 26844 kB PageTables: 152 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 61728 kB Committed_AS: 3784 kB VmallocTotal: 1032148 kB VmallocUsed: 6052 kB VmallocChunk: 1020016 kB MemTotal: 123456; MemFree 77788 INSMOD wlan START...... ethcmdVportEnable--------SUPPORT_ATP_ETH_BCM_EXT_SWITCH_53125----- ARL table flush done MASK- ifconfig [eth0]********** Write PhyId<0x18> reg<0x0> value<0x1140> device eth0 is not a slave of br0 INSMOD wlan Done [wlanschedule.c WlanTimeRuleSetup:828] WlanTimeRuleSetup. bRecSntpNotify=0,ulWlScheduleItemNum=0 LedcmswpsChgProc :9 clear all the autochannel timer Setting SSID: "vodafone54F1" WlanSetSsid: SSID=vodafone54F1 wlctl: Unsupported wlancms: events/0 is running as Real Time process. wlancms: events/1 is running as Real Time process. wlctl: Unsupported wlctl: Unsupported begin WlanStartServices... init auth client init acct client init das server wlctl: wl driver adapter not found acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x1001 wlctl: wl driver adapter not found wlan wps enabled... begin WlanUpInterfaces... atp: cur kernel version:[2.6.30] ifconfig: SIOCSIFADDR: File exists Radvd work on br0 is disableFILE[radvdcms.c] LINE[363] Dhcp6s work on br0 is disableFILE[dhcp6scms.c] LINE[317] lBridgeKey is 0 ============GET Interface Failed WAN:InternetGatewayDevice.WANDevice.2.WANConnectionDevice.1.WANPPPConnection.1 check not init. 10.8.57.0 -1 10.8.57.0 -1 10.8.58.0 -1 10.8.57.0 -1 10.8.58.0 -1 10.8.59.0 -1 10.8.57.0 -1 10.8.58.0 -1 10.8.59.0 -1 10.15.220.0 -1 10.8.57.0 -1 10.8.58.0 -1 10.8.59.0 -1 10.15.220.0 -1 10.179.32.0 -1 10.8.57.0 -1 10.8.58.0 -1 10.8.59.0 -1 10.15.220.0 -1 10.179.32.0 -1 127.100.0.1 -1 10.8.57.0 -1 10.8.58.0 -1 10.8.59.0 -1 10.15.220.0 -1 10.179.32.0 -1 127.100.0.1 -1 127.100.0.2 -1 10.8.57.0 -1 10.8.58.0 -1 10.8.59.0 -1 10.15.220.0 -1 10.179.32.0 -1 127.100.0.1 -1 127.100.0.2 -1 127.100.0.3 -1 iptables: No chain/target/match by that name iptables v1.4.0: Couldn't find target `rule24' Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name ip6tables: No chain/target/match by that name ip6tables v1.4.0: Couldn't find target `rule24' Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name Sorry, rule does not exist. iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) cms dispatch now ... [wlanschedule.c WlanTimeRuleSetup:828] WlanTimeRuleSetup. bRecSntpNotify=1,ulWlScheduleItemNum=0 [(debug)01:00:50.530 :1767:tapi tapi.c:2761]: TAPI CREATE Oper Succ![obj:0xffffffff, dev:24, chres:0, call:PSTN] [(debug)01:00:50.531 :1767:tapi tapi.c:2516]: Alloc PSTN_UP 0 channel Succ. [dev=24, Chres = 0] [(debug)01:00:50.531 :1767:tapi tapi.c:2761]: TAPI CREATE Oper Succ![obj:0xffffffff, dev:25, chres:1, call:ISDN] [(debug)01:00:50.531 :1767:tapi tapi.c:2574]: Alloc ISDN_UP 0 channel Succ. [dev=25, Chres = 1] [(debug)01:00:50.531 :1767:tapi tapi.c:2761]: TAPI CREATE Oper Succ![obj:0xffffffff, dev:26, chres:2, call:ISDN] [(debug)01:00:50.532 :1767:tapi tapi.c:2574]: Alloc ISDN_UP 1 channel Succ. [dev=26, Chres = 2] TAPI_AllocResource() OK! [(debug)01:00:50.533 voice:1830:tapi tapi.c:793]: TAPI thread thread started with pid 1830BOS: Enter bosInit bosTimerInit Enter bosAppInit Exit bosAppInit BOS: Exit bosInit Created message queue "HDSP", depth 40, id 1 [(debug)01:00:50.536 voice:1830:tapi tapi_cb.c:66]: Start TCB Succ!00:00:53 Endpoint Event task started with pid 1846... ------------- gwSipStartup OK! ------------ [(debug)01:00:53.727 voice:1853:tapi tapi_cms.c:656]: TAPI_CMS thread started with pid 1853 CS PCM_READ thread started with pid 1855