I-O DATA WN-DEAX1800GR
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX1800) | |
---|---|
wireless router | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
I-O DATA WN-DEAX1800GR |
FCC ID |
none specified |
Type |
wireless router |
CPU1 | |
CPU1 Type |
MIPS 1004Kc |
CPU1 Speed |
880 MHz ( 2 cores ) 16-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 | |
Switch | |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
12 VDC, 1 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 3.3, (115200 8N1) |
Flags: Wi-Fi 6 | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
MediaTek MT7915DAN |
Chip2 |
MediaTek MT7975DN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n/ax |
802.11ax |
up to 574 Mbps |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
MediaTek MT7915DAN |
Chip2 |
MediaTek MT7975DN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac/ax |
802.11ax |
up to 1201 Mbps |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented I-O DATA device with specifications, see I-O DATA.
Overview
OEM site reports unit as AX while OpenWrt site reports unit as AC. Info in this entry maybe incorrect.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: ?
Current supported version: snapshot
Comment:
MIMO 2x2:2, DBDC
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: ?
Current supported version: snapshot
Comment:
MIMO 2x2:2, DBDC
Please insert instructions here
Categories:
- I-O DATA
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7621A
- MediaTek
- Embedded System MIPS 1004Kc
- Embedded System
- OpenWrt Supported
- Embedded System MT7915DAN
- Embedded System MT7975DN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation