I2SE Duckbill v1
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | I2SE Duckbill v1 |
| Type | single-board computer |
| CPU1 | Freescale i.MX283 |
| CPU1 Type | ARM926J |
| CPU1 Speed | 454 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 0 MiB 0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (SD) |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Freescale i.MX283 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | SD, USB 2.0 Device |
| USB ports | 1 |
| SD/MMC Slots | 1 |
| USB Hub Compatible | Untested |
| Power | 5 VDC, ? A |
| Connector type | USB 2.0 A plug |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: mxs
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 15.05
Current supported version: 24.10.2
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 15.05
Current supported version: 24.10.2
WLAN Comment: No WLAN
Please insert instructions here