IBoss Home Wireless G

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
iBoss Home Parental Control
Advanced Internet Content Filter and Wireless-G Router
WikiDevi.wi-cat.ru IBoss Home Wireless G
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev iBoss HomeWireless G
FCC ID NDD9562040507
Type wireless router
CPU1 checkY Realtek RTL8186
CPU1 Type Lexra LX5280
CPU1 Speed 180 MHz
Flash1 Chip Macronix MX29LV320CBTC-70G
Flash1 Size 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip Mezza Z2V64S40DTP-G75
ETH chip1 Realtek RTL8186
Switch Realtek RTL8305SC
Ethernet Port Count 1-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:0E:2E (2 E, 12 W)
Ethernet OUI: 00:0E:2E (2 E, 12 W)

Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel
Other

Default SSID: iboss-XXXXXX
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1335 additional devices
of which 0 are iBoss devices

Manuf/OEM/ODM Edimax BR-6204Wg v2
Retail
FCC approval date 16 August 2005
(Est.) release date November 2007
(Est.) initial retail price (in USD): $129.95
Country of manuf China
Radio 1
Chip1 Realtek RTL8186
Chip2 Realtek RTL8225
Wireless interface OUI 00:0E:2E
Antenna Connector Type RP-SMA
Wireless Standard IEEE 802.11b/g
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 FCC ID
CompUSA 54Mbps Wireless Broadband Router (333628)NDD9562040507
Edimax BR-6204Wg / BR-6304Wg / EW-7209APg v1NDD9562040507

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"1244-00000445-01Z Rev.A" is silkscreened on the board (or at least one board).

Per the manual, to reset the device to factory defaults...

  • power off the unit
  • reconnect the power
  • upon connecting the power, wait for the power LED to start blinking, then wait for the power LED to go solid
  • hold the reset button for 15 seconds
  • release power button
  • wait for up to 3 min

The FCC ID on the device label is NDD9562040507.. but it would seem that it should instead be NDD9562040608 (the FCC ID of the v2, which shares the same silkscreened text on the board).

The phantom-334455 SSID would seem to be relevant to this device..

Links of Interest

Product page (via archive.org)
Manual