iNexQ (Unex) ISW054t
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |||||||
---|---|---|---|---|---|---|---|
wireless router | |||||||
3rd Party Firmware | |||||||
dd-wrt | |||||||
OpenWrt |
Incompatible | ||||||
Tomato any flavor |
Incompatible | ||||||
Platform | |||||||
Brand • Model • Rev |
iNexQ (Unex) ISW054t | ||||||
FCC ID | |||||||
Type |
wireless router | ||||||
CPU1 |
Silicon Data SD9216-BB | ||||||
Flash1 Chip |
AMD Am29LV800BT-90EC | ||||||
Flash1 Size |
1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> | ||||||
RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||
RAM1 Chip |
EtronTech EM638325TS-6 | ||||||
ETH chip1 |
Silicon Data SD9216-BB | ||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||
Wired Standard |
IEEE 802.3i/3u | ||||||
Stock FW OS |
ThreadX G4.0.4.0 | ||||||
Expansion IF types |
Mini PCI | ||||||
Mini PCI slots |
1 | ||||||
Power |
9 VDC, 1.5 A | ||||||
Connector type |
barrel | ||||||
Serial Port (UART) |
yes, internal, 6-pin header, (19200,8,N,1), J213 | ||||||
Other | |||||||
Default SSID: WLAN (15 addl. devices) | |||||||
Retail | |||||||
FCC approval date | 08 October 2003 | ||||||
(Est.) release date | October 2003 | ||||||
EAN |
4719571030038 (UPC DB, On eBay) | ||||||
Radio 1 | |||||||
Radio1 module | |||||||
Radio1 module IF |
Mini PCI | ||||||
Chip1 |
Intersil ISL3880 | ||||||
Chip2 |
Intersil ISL3686A | ||||||
Wireless interface OUI |
00:10:A7 | ||||||
Antenna Connector Type |
U.FL, RP-SMA | ||||||
Wireless Standard |
IEEE 802.11b/g | ||||||
802.11g |
up to 54 Mbps | ||||||
802.11b |
up to 11 Mbps | ||||||
WiFi Operating Frequency |
2.4 GHz | ||||||
|
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Silicon Data chipsets with specifications, see Silicon Data.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
- "760-05505006 VER:0D" is silkscreened on top the main board.
- A sticker with "347 820-05505020 Ver.0E" printed on it is affixed to the bottom of the board.
- "MS6818" and "VER:100" is silkscreened on the wireless module.
- This wireless module is an MSI MP54GS (MS-6818). The FCC ID of the wireless module has been assigned to this entry (there is none on the label).
The firmware on the router used in this entry is 20-06-07T5, dated 2003-10-22.
This device is assumed to be using the ThreadX RTOS based on cursory FW examination..
- The version string within the FW is Copyright (c) 1996-2001 Express Logic Inc.
- • ThreadX LX4189/Green Hills Version G4.0.4.0 *
Links of Interest
- Same author w/ another message on the gpl-violations.org mailing list
- the ISW054u would appear to be the same device with a USB port
JTAG-Serial Info
Serial
Serial Pinouts
J213 (TxD) (GND) (...) (...) --> R side (+ end) of board (RxD) (GND)
Info derived from
boot log |
---|
Power-On Self Testing... Testing SYS Controller... Testing MEM Controller... SDRAM Configuration:ROW11_COL8_BANK2 Testing SDRAM Memory ... From 0x80000000 - 0x807FFFFF Testing CPU Data RAM... Testing CPU Internal Registers... Testing Timer 0... Testing Timer 1... Testing DMA Controller... Testing INT Controller... Testing PCMCIA Controller... Testing USB Controller... Testing Ethernet 0 MAC... Testing Ethernet 1 MAC... Testing Cardbus... Testing PCI... Power-On Self Test Passed Bootloader Version 00-03-02, Aug 29 2003 21:45:21 Copyright 2003. All rights reserved. Press any key to stop auto-boot... 0 auto-booting... ========POR reset======== Start of heap: 0x80629f30 End of heap: 0x80800000 Firmware Version: 20-06-07T5, Oct 22 2003 15:46:54 Copyright 2002-2003. All rights reserved. Scanning PCI Bus... scan PCI deviceNo=1 Found ISL3890 Wireless Device: PCIDEV=1, DEVNUM=4, NICNO=0 WLAN0 Zone Number is 0 ******** WLAN Enabled ******* ******* AP CONFIG LAUNCHED ******* WLS Channael number is 6 Finished wlan firmware download Link State: 6c 00 00 00 34 2e br0: port 0.0.0.1(eth1 rootport) entering listening state br0: port 0.0.0.2(wls0 rootport) entering listening state NAT/Firewall starting... MaxSessionNumber: 65536 NAT/Firewall started! Now try to get the configuration file... interface eth1 uses following ip settings: 192.168.62.1/255.255.255.0 Initialization of NAT/Firewall policy database succeeded! load_pptp_wan: encryption option=e1 br0: port 0.0.0.2(wls0 rootport) entering learning state br0: port 0.0.0.1(eth1 rootport) entering learning state br0: port 0.0.0.2(wls0 rootport) entering forwarding state br0: topology change detected, propagating br0: port 0.0.0.1(eth1 rootport) entering forwarding state br0: topology change detected, propagating SD9218> dhcp_update_table called, iface=1 start_ip=192.168.62.50, end_ip=192.168.62.100 route_cfg_update: dycfg.tx_protocol=0, dycfg.rx_protocol=0, dycfg.mode=0 dhcp_update_table return |
bootloader menu + boot params |
---|
BOOT> ? Main menu ? - print this menu f - load from Flash and go l - load from TFTP server to SDRAM (no save to Flash, no go) L - load from TFTP server to SDRAM and go (no save to Flash) @ - load from TFTP server to SDRAM,save to Flash and go g - go from address b - show boot parameters c - change boot parameters d - display factory default parameters m - modify/set factory default parameters p - ping test (ping other station from the target) r - read memory s - change mac address only w - write memory BOOT> b tftpserver (R/W) 192.168.62.10 tftpfile (R/W) zrtos.img ipaddr (R/W) 192.168.62.1 subnetmask (R/W) 255.255.255.0 gateway (R/W) 0.0.0.0 |
Pictures
- external
See also
Categories:
- INexQ (Unex)
- Embedded system/wireless router
- Embedded System Silicon Data
- Embedded System SD9216-BB
- Silicon Data
- Embedded System Intersil
- Embedded System ISL3880
- Intersil
- Embedded System ISL3686A
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation