IOGear GWA502
| bg (G54) | |||||
|---|---|---|---|---|---|
| Wireless-G Broadband Router | |||||
|
| |||||
| Homepage | Product page | ||||
| WikiDevi.wi-cat.ru | IOGear GWA502 | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Status Unknown | ||||
| Tomato any flavor | Incompatible | ||||
| Platform | |||||
| Brand • Model • Rev | IOGear GWA502 | ||||
| FCC ID | QVZ20200000 | ||||
| Type | wireless router | ||||
| CPU1 | Intersil ISL3893 | ||||
| CPU1 Type | ARM946E | ||||
| CPU1 Speed | not specified | ||||
| Flash1 Chip | Macronix MX29LV160ATTC-90 | ||||
| Flash1 Size | 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> | ||||
| RAM1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
| RAM1 Chip | SK hynix HY57V641620HG | ||||
| ETH chip1 | Intersil ISL3893 | ||||
| Switch | IC+ IP175A | ||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u | ||||
| Expansion IF types | none specified | ||||
| Power | 12 VDC, 1 A | ||||
| Connector type | barrel | ||||
|
| |||||
|
| |||||
| Other | |||||
|
Default SSID: Wireless-G | |||||
| Manuf/OEM/ODM | Microlink MWL-21G3 | ||||
| Retail | |||||
| FCC approval date | 25 March 2004 | ||||
| Radio 1 | |||||
| Chip1 | Intersil ISL3893 | ||||
| Chip2 | Intersil ISL3686A | ||||
| Wireless interface OUI | 00:0C:55 | ||||
| Antenna Connector Type | none specified | ||||
| Wireless Standard | IEEE 802.11b/g | ||||
| 802.11g | up to 54 Mbps | ||||
| 802.11b | up to 11 Mbps | ||||
| WiFi Operating Frequency | 2.4 GHz | ||||
| |||||
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented IOGear devices with specifications, see IOGear.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
"MWL-21G4" and "Ver 02" is silkscreened on the board in the FCC photos.
- The Flash chip appears to be a MX29LV160ATTC-90 (2 MB).
The default SSID is presumed to be Wireless-G and the OUI is presumed to be 00:0C:55. Both are the values used in the manual and there is moderate WiGLE support.
The power adapter shown in the FCC photos is a Hon-Kwang D12-1A (120VAC ~ 60Hz, 23W -> 12VDC, 1.0A).
Links of Interest
- IOGear
- Embedded system/wireless router
- Embedded System Intersil
- Embedded System ISL3893
- Intersil
- Embedded System ARM946E
- Embedded System
- Embedded System IC+
- Embedded System IP175A
- IC+
- Manuf Microlink
- Embedded System ISL3686A
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation