IP-COM W63AP
abgn+ac (AC1200) | |||||
---|---|---|---|---|---|
AC1200 Wave2 Gigabit Access Point | |||||
3rd Party Firmware | |||||
dd-wrt | Status Unknown | ||||
OpenWrt | Status Unknown | ||||
Tomato any flavor | Incompatible | ||||
Platform | |||||
Brand • Model • Rev | IP-COM W63AP | ||||
FCC ID | 2ABZMW63AP, V7TI24 | ||||
Board ID | 10038683 V1.0 | ||||
Type | access point | ||||
CPU1 ![]() | Qualcomm Atheros QCA9531 | ||||
CPU1 Type | MIPS 24Kc | ||||
CPU1 Speed | 650 MHz | ||||
Flash1 Chip | Brand? Model? | ||||
Flash1 Size | ? MiB | ||||
RAM1 Size | ? MiB | ||||
RAM1 Chip | Brand? Model? | ||||
ETH chip1 | Qualcomm Atheros QCA9531 | ||||
ETH chip2 | Qualcomm Atheros QCA8334 | ||||
Ethernet Port Count | 1-1GbE-LAN | ||||
Wired Standard | IEEE 802.3i/3u/3ab | ||||
802dot11 OUI: none specified | |||||
Expansion IF types | none specified | ||||
Power | 12 VDC, 1.5 A | ||||
Connector type | barrel | ||||
Flags: | |||||
| |||||
Other | |||||
Default IP address: 192.168.0.254 | |||||
Manuf/OEM/ODM | Tenda i24 | ||||
Retail | |||||
FCC approval date | 22 March 2019 | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 | Qualcomm Atheros QCA9531 | ||||
Wireless interface OUI | none specified | ||||
Antenna Connector Type | none specified | ||||
MIMO status | 2x2:2 | ||||
Wireless Standard | IEEE 802.11b/g/n | ||||
802.11n | up to 300 Mbps | ||||
802.11g | up to 54 Mbps | ||||
802.11b | up to 11 Mbps | ||||
WiFi Operating Frequency | 2.4 GHz | ||||
Radio 2 | |||||
Chip1 | Qualcomm Atheros QCA9886 | ||||
Wireless interface OUI | none specified | ||||
Antenna Connector Type | none specified | ||||
MIMO status | 2x2:2 | ||||
Wireless Standard | IEEE 802.11a/n/ac | ||||
802.11ac | up to 867 Mbps | ||||
802.11n | up to 300 Mbps | ||||
802.11a | up to 54 Mbps | ||||
WiFi Operating Frequency | 5 GHz | ||||
|
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented IP-COM devices with specifications, see IP-COM.
Overview
FCC ID 2ABZMW63AP is a change in ID request from V7TI24 of the Tenda i24. Qualcomm CPU and radio chip IDs are not shown in the FCC internal photos. The CPU is assumed to be a QCA9531 like what's in the Tenda W15E V2. WI2 is likely a QCA9886 since it is 2x2 and supports MU-MIMO.
"10038683" and "V1.0" are silkscreened on the board in the FCC photos.
- IP-COM
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9531
- Qualcomm Atheros
- Embedded System MIPS 24Kc
- Embedded System
- Embedded System QCA8334
- Manuf Tenda
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9886
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation