innacomm W3400V6

multiple revisions of this device, use caution

bg (G54)
wireless router, dsl modem
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Status Unknown
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	innacomm W3400 V6
FCC ID	none specified
Type	wireless router, dsl modem
CPU1 Y	Broadcom BCM6328
CPU1 Type	BMIPS4350
CPU1 Speed	320 MHz
Flash1 Chip	Macronix MX25L6406E
Flash1 Size	8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI NOR)
RAM1 Size	64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	Brand? Model?
ETH chip1	Broadcom BCM6328
Switch	Broadcom BCM6328
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Flags: xDSL
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	Broadcom BCM4312
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand innacomm W3400 Realtek Realtek innacomm W3400V6 Broadcom Broadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented innacomm devices with specifications, see innacomm.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: bmips
Subtarget: bcm6328
Package architecture: mips_mips32
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.0

LAN Hardware: Broadcom BCM6328
WLAN Hardware: Broadcom BCM4312
Installation method(s):
see git-commit
Comment:
Moved to bmips target with https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=6bc26c7d499ba5c261d4b158241d44ffe3c520d9

git • >>

bcm63xx: add support for Innacomm W3400V6 Innacomm W3400V6 is an xDSL B/G wireless router based on Broadcom BCM6328 SoC. Hardware: SoC: Broadcom BCM6328 CPU: BMIPS4350 V8.0, 320 MHz, 1 core Flash: SPI-NOR 8MB, MX25L6406E RAM: 64 MB Ethernet: 4x 10/100 Mbps Switch: Integrated Wireless: 802.11b/g, BCM4312 LEDs/Buttons: 9x / 2x Flash instruction, web UI: 1) Set a static IP on your computer compatible with 192.168.1.1, i.e 192.168.1.100 2) Connect the ethernet cable from your computer to the router. 3) Make sure the router is powered off. 4) Press the reset button, don't release it yet! 5) While pressing reset, power on the router. 6) Wait 10 seconds or more. Note: The power LED is red at first then turns to solid green when ready. 8) Release the reset button. 9) Browse to 192.168.1.1 10) Select .bin file. 10) Upgrade the image. 11) Wait for it to reboot.