We're currently finishing up our MediaWiki 1.39 upgrade. MediaWiki is converting the format in which page content is stored behind the scenes - until this is done, you may see an error saying there is no text in your pages. Please be patient, this process is progressing as fast as it can, and your pages will be restored when it completes. Any further issues, don't hesitate to get in touch with our support team, or watch our Facebook page for the most up-to-date information.
Intellidesign Hyrax PCP-100 rev A
From TechInfoDepot
Jump to navigationJump to search
bgn (N72) | |
---|---|
wireless router | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Intellidesign Hyrax PCP-100 rev A |
FCC ID |
none specified |
Type |
wireless router |
CPU1 ![]() |
Atmel ATSAMA5D35 |
CPU1 Speed |
536 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
Ethernet Port Count |
2-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
USB 2.0, Micro SD Card Slot |
USB ports |
1 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Serial Port (UART) |
yes |
JTAG Port |
no |
Flags: Mobile Wireless/Cellular network | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Radio1 module | |
Radio1 module IF |
SDIO |
Chip1 |
Brand? Model? |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 72.2 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
- • 72.2 Mbps - 1SS 2.4GHz 802.11n (20MHz chan.)
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: at91
OpenWrt Subtarget: sama5d3
OpenWrt Package architecture: unknown
Support started version: 14.07
Current supported version: EOL
Last Supported Version: 18.06.9
On the OpenWrt Wiki
OpenWrt Target: at91
OpenWrt Subtarget: sama5d3
OpenWrt Package architecture: unknown
Support started version: 14.07
Current supported version: EOL
Last Supported Version: 18.06.9
Please insert instructions here