Intenso Memory 2 Move 1TB Black

multiple revisions of this device, use caution

bgn (N150)
Intenso Memory 2 Move 2,5" USB 3.0
Homepage	Product page
Support	Support page
WikiDevi.wi-cat.ru	Intenso Memory 2 Move 1TB Black
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Was Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Intenso Memory 2 Move 1TB (BLACK)
FCC ID	none specified
Type	mobile NAS
CPU1 Y	Ralink RT5350
CPU1 Type	MIPS 24KEc
CPU1 Speed	360 MHz
Flash1 Chip	Winbond Model?
Flash1 Size	8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Winbond Model?
ETH chip1	Ralink RT5350
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Stock bootloader	U-Boot
Stock FW OS	Linux 2.6.21
Expansion IF types	USB 3.0, SATA
USB ports	1
SATA Ports	1
USB Hub Compatible	Untested
Power	5 VDC, 1 A ?v BAT , 3000 mAh, ? cells
Connector type	USB Female (Micro-B)
Serial Port (UART)	yes, (57600 8N1)
Flags: battery, portable
Other
Default login user: admin Default login password: 00000 admin:00000 credentials used by 2 additional devices of which 0 are Intenso devices
3rd Party Firmware Support	OpenWrt (Was)
Retail
Availability	End of Life
EAN	4034303017805 (UPC DB, On eBay)
ASIN	B00D22UIOG
Country of manuf	Germany
Radio 1
Chip1	Ralink RT5350
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Intenso Memory 2 Move 1TB Black Ralink Ralink Intenso Memory 2 Move 1TB White Ralink Ralink Intenso Memory 2 Move 250GB Black Ralink Ralink Intenso Memory 2 Move 250GB White Ralink Ralink Intenso Memory 2 Move 500GB Black Ralink Ralink Intenso Memory 2 Move 500GB White Ralink Ralink

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Intenso devices with specifications, see Intenso.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

Take control?

telnet service is enabled - passwords are stored in the passwd file;

user "admin" can read it - maybe its someones brithday? try 20080826 :)

• In-depth device and firmware breakdown: http://hckohwnotes.blogspot.de/

The circuit board has ready-to-solder pins for a serial interface:

4 pads, on the battery side, +Vcc TTL on the square pad, then Txc, then Rxc, then Gnd.

A TTL voltage level (3.3V) to serial (5V), or more commonly USB port adapter such as CP2102 -based plugs, is needed.

• The default port configuration is: 576008N1, software flow control.

The booting log is dumped on this interface, which is then available for logging in through a standard getty.

Links of Interest

PBrief

GPL Source is available

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki

Target: ramips
Subtarget: rt305x
Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: EOL
Last Supported Version: 22.03.7

WLAN Hardware: Ralink RT5350
Comment:
Final version: 22.03.7

Please insert instructions here