ipTIME AX3000Q

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac+ax (AX3000)
AX3000 Gigabit Mesh Wi-Fi 6 Router
Homepage Product page
WikiDevi.wi-cat.ru IpTIME AX3000Q
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev ipTIME AX3000Q
FCC ID (fcc.io) none specified
FCC ID (fcc.report) none specified
Type wireless router
CPU1 checkY MediaTek MT7981BA
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip ESMT F50L1G41LB
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip ESMT M15T2G16128A
ETH chip1 MediaTek MT7981BA
Switch MediaTek MT7531AE
Ethernet Port Count 1-1GbE-WAN
4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: B0:38:6C (2 E, 2 W)
Ethernet OUI: B0:38:6C (2 E, 2 W)

Stock bootloader U-Boot
Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, unpopulated, J6, 3.3V TTL, (115200 8N1)

Flags:
Wi-Fi 6, Mesh, WPA3, MU-MIMO

Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 MediaTek MT7981BA
Chip2 MediaTek MT7976CN
Wireless interface OUI B0:38:6C
Antenna Connector Type U.FL (internal)
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7981BA
Chip2 MediaTek MT7976CN
Wireless interface OUI B0:38:6C
Antenna Connector Type U.FL (internal)
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 2402 Mbps
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
IpTIME AX3000SMMediaTekMediaTekMediaTek
ipTIME AX3000BCM
ipTIME AX3000MMediaTekMediaTekMediaTek
ipTIME AX3000QMediaTekMediaTekMediaTek
ipTIME AX3000SEMediaTekMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented ipTIME devices with specifications, see ipTIME.

574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),
2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 24.10.3
Current supported version: 24.10.5
LAN Comment: MediaTek MT7531AE
WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: Multi User MIMO
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >>
mediatek: filogic: add support for ipTIME AX3000Q
Specification
-------------
- SoC       : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3GHz
- RAM       : DDR3 256Mbytes, ESMT M15T2G16128A
- Flash     : 128Mbytes NAND Flash, ESMT F50L1G41LB
- WLAN      : MediaTek MT7976CN dual-band Wi-Fi 6
  - 2.4GHz  : b/g/n/ax, MU-MIMO
  - 5GHz    : a/n/ac/ax, MU-MIMO
- Ethernet  : MediaTek MT7531AE
  - LAN     : 10/100/1000 Mbps x4
  - WAN     : 10/100/1000 Mbps x1
- UART      : 1x4 pin header on PCB
  - [J6] TX, RX, GND, 3.3V (115200, 8N1)
- Buttons   : WPS, Reset
- LEDs      : 1x CPU (Amber)
              1x Wi-Fi 5GHz (Amber)
              1x Wi-Fi 2.4GHz (Amber)
              1x WAN activity (Amber)
              4x LAN activity (Amber)
- Power     : 12VDC, 1A (Center positive polarity)

MAC address
-----------
+-----------+-------------------+-----------------------+
| Interface | MAC               | Algorithm             |
+-----------+-------------------+-----------------------+
| WLAN 2.4G | B0:38:6C:48:xx:xx | label                 |
| WLAN 5G   | B2:38:6C:48:xx:xx | label with LA Bit Set |
| WAN       | B0:38:6C:48:xx:xx | label + 1             |
| LAN       | B0:38:6C:48:xx:xx | label + 3             |
+-----------+-------------------+-----------------------+
The WLAN 2.4G MAC was found in 'Factory' partition, 0x4

Installation
------------
1. Download the OEM recovery software from the manufacturer's website
2. Download the *squashfs-factory.bin file from the OpenWrt website
3. Press a reset button, and power up the router(keep pressing the reset button)
4. Wait more than 10 seconds until the CPU LED stop blinking
5. Connect the router(LAN port) to the PC
6. Replace a file in the OEM recovery software with the file from step 2
7. Run the OEM recovery software and follow the instructions
8. Wait for the router to boot from *squashfs-factory.bin

See also