ipTIME AX3000SE
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX3000) | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wi-Fi 6 Gigabit Wireless Router | |||||||||||||||||||||||||
 | |||||||||||||||||||||||||
| Homepage | Product page | ||||||||||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||||||||||
| Platform | |||||||||||||||||||||||||
| Brand • Model • Rev | ipTIME AX3000SE | ||||||||||||||||||||||||
| FCC ID | none specified | ||||||||||||||||||||||||
| Type | wireless router | ||||||||||||||||||||||||
CPU1  | MediaTek MT7981BA | ||||||||||||||||||||||||
| CPU1 Type | ARM Cortex-A53 | ||||||||||||||||||||||||
| CPU1 Speed | 1.3 GHz ( 2 cores ) 64-bit | ||||||||||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||||||||||
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) | ||||||||||||||||||||||||
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||||||||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||||||||||
| ETH chip1 | MediaTek MT7981BA | ||||||||||||||||||||||||
| Switch | MediaTek MT7531AE | ||||||||||||||||||||||||
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||||||||||||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||||||||||||||
| Stock bootloader | U-Boot | ||||||||||||||||||||||||
| Expansion IF types | none specified | ||||||||||||||||||||||||
| Power | 12 VDC, 1 A | ||||||||||||||||||||||||
| Connector type | barrel | ||||||||||||||||||||||||
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||||||||||||||||||||||
| JTAG Port | no | ||||||||||||||||||||||||
|
Flags: | |||||||||||||||||||||||||
|
| |||||||||||||||||||||||||
| Other | |||||||||||||||||||||||||
|
| |||||||||||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||||||||||
| Radio 1 | |||||||||||||||||||||||||
| Chip1 | MediaTek MT7981BA | ||||||||||||||||||||||||
| Chip2 | MediaTek MT7976CN | ||||||||||||||||||||||||
| Wireless interface OUI | B0:38:6C | ||||||||||||||||||||||||
| Antenna Connector Type | MHF4 | ||||||||||||||||||||||||
| MIMO status | 2x2:2 | ||||||||||||||||||||||||
| Wireless Standard | IEEE 802.11b/g/n/ax | ||||||||||||||||||||||||
| 802.11ax | up to 574 Mbps | ||||||||||||||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||||||||||
| Radio 2 | |||||||||||||||||||||||||
| Chip1 | MediaTek MT7981BA | ||||||||||||||||||||||||
| Chip2 | MediaTek MT7976CN | ||||||||||||||||||||||||
| Wireless interface OUI | B0:38:6C | ||||||||||||||||||||||||
| Antenna Connector Type | MHF4 | ||||||||||||||||||||||||
| MIMO status | 2x3:2 | ||||||||||||||||||||||||
| Wireless Standard | IEEE 802.11a/n/ac/ax | ||||||||||||||||||||||||
| AX-QAM | up to 2402 Mbps | ||||||||||||||||||||||||
| 802.11ax | up to 1201 Mbps | ||||||||||||||||||||||||
| 802.11ac | up to 867 Mbps | ||||||||||||||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||||||||||||||
| WiFi Operating Frequency | 5 GHz | ||||||||||||||||||||||||
| |||||||||||||||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented ipTIME devices with specifications, see ipTIME.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.1
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.1
Unsupported Functions:
WLAN LED for activity on both Wi-Fi 2.4GHz and Wi-Fi 5GHz
LAN Hardware: MediaTek MT7531AE
WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: Multi User MIMO
Installation method(s):
see devicepage
Recovery method(s):
see devicepage
WLAN LED for activity on both Wi-Fi 2.4GHz and Wi-Fi 5GHz
LAN Hardware: MediaTek MT7531AE
WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: Multi User MIMO
Installation method(s):
see devicepage
Recovery method(s):
see devicepage
| git • >> |
|---|
mediatek: add support for ipTIME AX3000SE
Specification
-------------
- SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3GHz
- RAM : DDR3 256Mbytes, ESMT M15T2G16128A
- Flash : 128Mbytes NAND Flash, ESMT F50L1G41LB
- WLAN : MediaTek MT7976CN dual-band Wi-Fi 6
- 2.4GHz : b/g/n/ax, MU-MIMO
- 5GHz : a/n/ac/ax, MU-MIMO
- Ethernet : MediaTek MT7531AE
- LAN : 10/100/1000 Mbps x4
- WAN : 10/100/1000 Mbps x1
- UART : 1x4 pin header hole on PCB
- 3.3V, RX, GND, TX (115200, 8N1)
- Buttons : WPS, Reset
- LEDs : 1x CPU (Amber/Blue)
1x Wi-Fi (Amber/Blue)
1x WAN activity (Amber/Blue)
4x LAN activity (Amber/Blue)
- Power : 12VDC, 1A (Center positive polarity)
Note: The LED color is amber or blue, depending on your router's color
(black/white).
MAC address
-----------
+-----------+-------------------+-----------+
| Interface | MAC | Algorithm |
+-----------+-------------------+-----------+
| WLAN 2.4G | B0:38:6C:xx:xx:xx | label |
| WLAN 5G | B2:38:6C:4x:xx:xx | |
| WAN | B0:38:6C:xx:xx:xx | label + 1 |
| LAN | B0:38:6C:xx:xx:xx | label + 3 |
+-----------+-------------------+-----------+
The WLAN 2.4G MAC address was found in 'Factory' partition, 0x4
Installation
------------
1. Download the OEM recovery software (ipTIME Firmware Wizard (11ac))
from the manufacturer's website
2. Download the *squashfs-factory.bin file from the OpenWrt website
3. Press a reset button, and power up the router (keep pressing the reset button)
4. Wait more than 10 seconds until the CPU LED stop blinking
5. Connect the router (LAN port) to the PC
6. Run the OEM recovery software and follow the instructions
7. Select the *squashfs-factory.bin file during the router recovery process
8. Wait for the router to boot from *squashfs-factory.bin
Limitation: Triggering the WLAN LED for activity on both phy0 (2.4GHz) and phy1 (5GHz)
----------
Currently, the UCI doesn't support triggering a single LED for activity
on multiple WLAN interfaces. As a temporary workaround, the LED is
configured to only indicate activity on `phy1`. If you wish to monitor
`phy0` instead, you must change the device from `phy1-ap0` to `phy0-ap0`
in the LuCI LED configuration.
|
See also
Categories:
- IpTIME
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7981BA
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System MT7531AE
- OpenWrt Supported
- Embedded System MT7976CN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
