Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.

JDCloud RE-SP-01B

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC2100)
wireless router
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev JDCloud RE-SP-01B
FCC ID none specified
Type wireless router
CPU1 checkY MediaTek MT7621AT
CPU1 Type MIPS 1004Kc
CPU1 Speed 880 MHz ( 2 cores ) 16-bit
Flash1 Chip Brand? Model?
Flash1 Size 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR)
RAM1 Size 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7621AT
Switch MediaTek MT7621AT
Ethernet Port Count 3-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 2.0
USB ports 1
USB Hub Compatible Untested
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 MediaTek MT7603EN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7615N
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

1733 Mbps - 4SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC2100 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: snapshot
WLAN Comment:
2.4GHz: 2x2:2 MIMO, 5GHz: 4x4:4 MIMO
Install Comment:
A 3rd party bootloader is required to boot the image. You can use a SOP16 test clip to burn the image/bootloader to the flash

Please insert instructions here