JJPlus JWAP003
From TechInfoDepot
Jump to navigationJump to searchsingle-board computer | |
InfoDepot Wiki | |
---|---|
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
JJPlus JWAP003 |
Type |
single-board computer |
CPU1 |
Atheros AR7130 |
CPU1 Type |
MIPS 24K |
CPU1 Speed |
300 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
Ethernet Port Count |
2-100MbE-LAN |
Wired Standard |
IEEE 802.3/3u |
| |
Stock bootloader |
RedBoot |
Expansion IF types |
Mini PCI, USB 2.0 |
Mini PCI slots |
1 |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
12 - 18 VDC, ? A |
Serial Port (UART) |
yes |
JTAG Port |
yes |
Flags: hw watchdog, temp | |
Other | |
| |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented JJPlus device with specifications, see JJPlus.
Links of Interest
- JJplus jwap003 r14573 - not booting On the DD-WRT Forum
- JJPlus JWAP003:
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
DD-WRT Activation Required. |
Supported by dd-wrt as of = jwap003 build 14439 20100517
Please insert instructions here
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
Support started version: 17.01.0
Current supported version: 19.07.10
Support started version: 17.01.0
Current supported version: 19.07.10
Please insert instructions here