Jensen AL29150
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||
---|---|---|---|---|---|
Jensen AirLink 29150 | |||||
![]() | |||||
Downloads | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt |
Incompatible | ||||
Tomato any flavor |
Incompatible | ||||
Platform | |||||
Brand • Model • Rev |
Jensen AL29150 v6 | ||||
FCC ID | |||||
Type |
wireless router | ||||
CPU1 ![]() |
Broadcom BCM5356L | ||||
CPU1 Type |
MIPS 74K | ||||
CPU1 Speed |
333 MHz | ||||
Flash1 Chip |
Winbond W25Q32VSIG | ||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
RAM1 Chip |
Winbond W9812G6IH-6 | ||||
ETH chip1 |
Broadcom BCM5356L | ||||
Switch |
Broadcom BCM5356L | ||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
Stock bootloader |
CFE 5.100.138.3 | ||||
Stock FW OS |
Linux eCos | ||||
Expansion IF types |
none specified | ||||
Power |
9 VDC, 0.6 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes, 4-pin header, 3.3V TTL, (115200 8N1), J3 | ||||
Other | |||||
Default SSID: AirLinkXXXXXX (1 addl. devices) | |||||
Retail | |||||
Availability | End of Life | ||||
FCC approval date | 13 August 2009 | ||||
EAN |
7070290001660 (UPC DB, On eBay) | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 |
Broadcom BCM5356L | ||||
Wireless interface OUI |
34:21:09 | ||||
Antenna Connector Type |
Fixed Non-Removable | ||||
MIMO status |
1x1:1 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
802.11n |
up to 150 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Links of Interest
Reviews
JTAG-Serial Info
Serial
- CPU: Broadcom BCM47XX; @300MHz
- Flash: Serial flash (ST); total size: 4MB
- RAM: SDRAM; tot mem: 16384 KB (16MB)
Boot log
bootlog • >> |
---|
Decompressing...done CFE version 5.100.138.3 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: 2011-05-26 10:33:50 4 (richard@aeteam.com) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 131072(0x20000) Found an ST compatible serial flash with 64 64KB blocks; total size 4MB et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.3 CPU type 0x19749: 300MHz Tot mem: 16384 KBytes CFE mem: 0x80700000 - 0x80798550 (623952) Data: 0x8072E3A0 - 0x807315C0 (12832) BSS: 0x807315C0 - 0x80732550 (3984) Heap: 0x80732550 - 0x80796550 (409600) Stack: 0x80796550 - 0x80798550 (8192) Text: 0x80700000 - 0x8072E39C (189340) Device eth0: hwaddr 34-21-09-19-17-40, ipaddr 192.168.38.1, mask 255.255.255.0 gateway not set, nameserver not set Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ..... 2750828 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 IP Filter: v3.4.35 initialized. Default = pass all, Logging = disabled PCI: no core PCI: no core PCI: Fixing up bus 0 wl_pci_probe: find [14e4:4329] bus 0 slot 1 func 0 irq 1 eCos Router/AP V5.110.27.21 (Compiled at 21:29:05 on Mar 16 2013) sys_led_test_gpio=6 Using pin 6 for sys_led output wps_led_test_gpio=7 System start vlan1: VLAN interface created vlan2: VLAN interface created wlconf: PHYTYPE: 4 Current channel = 6 EAPD task started initWebs: lanip=[192.168.38.1] NAS task started CLI> |