Due to spambots account creation is turned off, if you'd like an accout please email me at techinfodepot1@gmail.com
You do not need an accout to report a problem with the wiki.

-

KAONMEDIA DG2200TN

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1600)
VDSL Gateway
Kaon-dg-2200-desktop.jpg
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
KAONMEDIA DG2200TN (Telenor)
FCC ID
none specified
Type
wireless router, dsl modem
CPU1 checkY
Broadcom BCM63138U
CPU1 Type
ARMv7 Cortex A9
CPU1 Speed
1.0 GHz ( 2 cores ) 32-bit
Flash1 Chip
JSC JS27HU2G08SDDA-25
Flash1 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Size
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip
Samsung K4B4G1646E-BCBN
ETH chip1
Broadcom BCM63138U
Switch
Broadcom BCM63138U
Ethernet Port Count
1-1GbE-WAN
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: 44:F0:34, 98:77:E7
Ethernet OUI: 44:F0:34, 98:77:E7

Stock bootloader
CFE 1.0.38-118.8 BCM963138
Stock FW OS
Linux 3.4.11-rt19
Expansion IF types
USB 3.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 2.5 A
Connector type
barrel
Serial Port (UART)
yes, 5-pin header, 3.3V TTL, (115200 8N1), J109
Flags:
ADSL2+, VDSL2

Additional chips
xDSL CPE Line Driver w/ On-chi;Broadcom;BCM6303;BCM6303KMLG;1;

Retail
(Est.) release date December 2020
Country of manuf Indonesia
Radio 1
Chip1
Broadcom BCM43217T
Wireless interface OUI
44:F0:34, 98:77:E7
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
Broadcom BCM4365E
Wireless interface OUI
44:F0:34, 98:77:E7
Antenna Connector Type
none specified
MIMO status
3x3:3
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 1300 Mbps
802.11n
up to 450 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented KAONMEDIA device with specifications, see KAONMEDIA.

1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1600 class

Overview

Telenor WiFi Ruter

KAON Media DG2200TN

JTAG-Serial Info

Serial

Boot log

bootlog • >>
HELO
CPU0
PMCM
PMCS
PMCD
CODE
L1CD
MMUI
ZBBS
MAIN
4.1605-1.0.38-118.8
DRAM
NVRAM memcfg 0x427
MCB chksum 0xf67f5b05
DDR3-1600 CL11 512MB
Changed Byte Lane LDE
Changed Byte Lane LDE
PASS
FPS0
BT99
0001
BT00
0552
NAN3
RFS2
NAN5


Base: 4.16_05
CFE version 1.0.38-118.8 for BCM963138 (32bit,SP,LE)
Build Date: Wed Nov 21 13:37:51 KST 2018 (nwj99@ubuntu)
Copyright (C) 2000-2015 Broadcom Corporation.

Boot Strap Register:  0x7dfffe2f
Chip ID: BCM63138B0, ARM Cortex A9 Dual Core: 1000MHz
Total Memory: 536870912 bytes (512MB)
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: , id 0xadda block 128KB size 262144KB
*** nvram check start for DG2200TN ***
pmc_init:PMC using DQM mode
Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host/tftp (f/h/c)  : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Boot image (0=latest, 1=previous) : 0  
Default host ramdisk file name    :   
Default ramdisk store address     :   
Board Id (0-25)                   : DG2200TN  
Number of MAC Addresses (1-32)    : 11  
Base MAC Address                  : 98:77:e7:ee:05:07  
PSI Size (1-128) KBytes           : 48  
Enable Backup PSI [0|1]           : 0  
System Log Size (0-256) KBytes    : 0  
Auxillary File System Size Percent: 0  
MC memory allocation (MB)         : 4  
TM memory allocation (MB)         : 44  
DHD 0 memory allocation (MB)      : 14  
DHD 1 memory allocation (MB)      : 0  
DHD 2 memory allocation (MB)      : 0  
WLan Feature                      : 0x00  
Partition 1 Size (MB)             : 112M  
Partition 2 Size (MB)             : 1M  
Partition 3 Size (MB)             : 0M  
Partition 4 Size (MB) (Data)      : 4M 

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from latest image (address 0x04500000, flash offset 0x04500000) ...
Decompression LZMA Image OK!
Entry at 0x00008000
Starting program at 0x00008000
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.11-rt19 (jenkins@kubernetes-slave-brewery-6q7x2) (gcc version 4.6.2 (crosstool-NG git+ab5c880 - SoftAtHome 1.0.2) ) #1 SMP PREEMPT Mon Oct 5 14:01:46 UTC 2020
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: BCM963138
Ignoring unrecognised tag 0x41000603
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writealloc
creating a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL
creating a MT_MEMORY_NONCACHED device at physical address of 0x0d200000 to virtual address at 0xcd200000 with size of 0x2c00000 byte for RDPA tm
creating a MT_MEMORY_NONCACHED device at physical address of 0x0ce00000 to virtual address at 0xcce00000 with size of 0x400000 byte for RDPA mc
creating a MT_MEMORY_NONCACHED device at physical address of 0x0c000000 to virtual address at 0xcc000000 with size of 0xe00000 byte for DHD dhd0
On node 0 totalpages: 114432
free_area_init_node: node 0, pgdat c059c120, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 992 pages used for memmap
  Normal zone: 109344 pages, LIFO batch:31
pmc_init:PMC using DQM mode
pmc_init:fdb1 35f035f 4b004b
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B
PERCPU: Embedded 7 pages/cpu @c1405000 s5824 r8192 d14656 u32768
pcpu-alloc: s5824 r8192 d14656 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113408
Kernel command line: console=ttyS0,115200 earlyprintk debug
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 1048576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 192MB 255MB = 447MB total
Memory: 446100k/446100k available, 78188k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc0528fb0   (5252 kB)
      .init : 0xc0529000 - 0xc054e6c0   ( 150 kB)
      .data : 0xc0550000 - 0xc059cfc0   ( 308 kB)
       .bss : 0xc059cfe4 - 0xc05defe8   ( 265 kB)
Preemptible hierarchical RCU implementation.
	Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:256
Cortex A9 MPCORE GIC init
DIST at fc01f000, CPU_IF at fc01e100
map_hw_timer_interrupt,132: interrupt_id 96
map_hw_timer_interrupt,132: interrupt_id 97
map_hw_timer_interrupt,132: interrupt_id 98
map_hw_timer_interrupt,132: interrupt_id 99
sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 4294967295ms
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
Calibrating delay loop... 1990.65 BogoMIPS (lpj=995328)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
--Kernel Config--
  SMP=1
  PREEMPT=1
  DEBUG_SPINLOCK=0
  DEBUG_MUTEXES=0
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
Broadcom Logger v0.1 Oct  5 2020 13:58:06
Setting up static identity map for 0x3e88a0 - 0x3e88d4
CPU1: Booted secondary processor
CPU1: Unknown IPI message 0x1
Brought up 2 CPUs
SMP: Total of 2 processors activated (3981.31 BogoMIPS).
NET: Registered protocol family 16
++++ Powering up USB blocks
bcm63xx_pcie: setting resistor calibration value to 0xa
bcm63xx_pcie: applying serdes parameters
PCIE port 0 link-up
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
pci 0000:00:00.0: [14e4:6313] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
PCI: bus0: Fast back to back transfers disabled
pci 0000:01:00.0: [14e4:a8db] type 00 class 0x028000
pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:00.0: Checking PCIe ASPM for vendor 14e4 device a8db
PCI: bus1: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x90000000-0x900fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x90007fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0:   bridge window [mem 0x90000000-0x900fffff]
PCI: enabling device 0000:00:00.0 (0140 -> 0143)
bcm63xx_pcie: setting resistor calibration value to 0xa
bcm63xx_pcie: applying serdes parameters
PCIE port 1 link-up
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff]
pci 0001:00:00.0: [14e4:6313] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot
PCI: bus0: Fast back to back transfers disabled
pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
pci 0001:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]
pci 0001:01:00.0: reg 18: [mem 0x00000000-0x007fffff 64bit]
pci 0001:01:00.0: reg 20: [mem 0x00000000-0x000fffff 64bit pref]
pci 0001:01:00.0: supports D1 D2
pci 0001:00:00.0: Checking PCIe ASPM for vendor 14e4 device 4365
pci 0001:00:00.0: Disabling PCIe ASPM for vendor 14e4 device 4365
PCI: bus1: Fast back to back transfers disabled
pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa0bfffff]
pci 0001:00:00.0: BAR 9: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref]
pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa07fffff 64bit]
pci 0001:01:00.0: BAR 4: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref]
pci 0001:01:00.0: BAR 0: assigned [mem 0xa0800000-0xa0807fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01-01]
pci 0001:00:00.0:   bridge window [mem 0xa0000000-0xa0bfffff]
pci 0001:00:00.0:   bridge window [mem 0xa0c00000-0xa0cfffff 64bit pref]
PCI: enabling device 0001:00:00.0 (0140 -> 0143)
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
skb_free_task created successfully
gbpm_do_work scheduled
BLOG v3.0 Initialized
BLOG Rule v1.0 Initialized
Broadcom IQoS v0.1 Oct  5 2020 14:01:43 initialized
Broadcom GBPM v0.1 Oct  5 2020 14:01:43 initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource timer_cs
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
MPTCP: Stable release v0.86.7
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
fuse init (API version 7.18)
msgmni has been set to 871
io scheduler noop registered (default)
ramoops: attached 0x100000@0x1ff00000 (16x0x10000)
brd: module loaded
loop: module loaded
Broadcom NAND controller (BrcmNand Controller)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=40000001, nandConfig=26152300, chipSelect=0
brcmnand_read_id: CS0: dev_id=adda9095
After: NandSelect=00000001, nandConfig=26152300
Block size=00020000, erase shift=17
NAND Config: Reg=26152300, chipSize=256 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ad da Hynix HY27UF082G2A 256MB on CS0

Found NAND on CS0: ACC=c3840010, cfg=26152300, flashId=adda9095, tim1=65424458, tim2=80000e55
BrcmNAND version = 0x80000700 256MB @00000000
brcmnand_scan: B4 nand_select = 00000001
brcmnand_scan: After nand_select = 00000001
handle_acc_control: default CORR ERR threshold  3 bits
ACC: 16 OOB bytes per 512B ECC step; from ID probe: 16
page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17
Brcm NAND controller version = 7.0 NAND flash size 256MB @10000000
ECC layout=brcmnand_oob_bch4_2k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=35, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=4, eccbytes=7
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_slc_bch4_main_descr
Bad block table Bbt0 found at page 0001ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0001ff80, version 0x01 for chip on CS0
brcmnand_reset_corr_threshold: default CORR ERR threshold  3 bits for CS0
***** Found UBIFS Marker at 0x0481ff00
***** Found UBIFS Marker at 0x002fff00
Creating 10 MTD partitions on "brcmnand.0":
0x000004820000-0x0000089e0000 : "rootfs"
0x000000300000-0x000004500000 : "rootfs_update"
0x00000fb00000-0x00000ff00000 : "user"
0x000000000000-0x000000020000 : "nvram"
0x000004500000-0x0000089e0000 : "image"
0x000000020000-0x000004500000 : "image_update"
0x000004500000-0x000004820000 : "bootfs"
0x000000020000-0x000000300000 : "bootfs_update"
0x00000fa00000-0x00000fb00000 : "misc2"
0x000008a00000-0x00000fa00000 : "misc1"
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: max. sequence number:       2
UBI: attached mtd0 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            65 MiB
UBI: number of good PEBs:        526
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 526
UBI: number of PEBs reserved for bad PEB handling: 5
UBI: max/mean erase counter: 1/0
UBI: image sequence number:  0
UBI: background thread "ubi_bgt0d" started, PID 287
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform ehci-platform.0: Generic Platform EHCI Controller
ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
ehci-platform ehci-platform.0: irq 105, io mem 0x8000c300
ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform ohci-platform.0: Generic Platform OHCI Controller
ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
ohci-platform ohci-platform.0: irq 104, io mem 0x8000c400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci-hcd xhci-hcd.0: xHCI Host Controller
xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.0: irq 106, io mem 0x8000d000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 0 ports detected
xhci-hcd xhci-hcd.0: xHCI Host Controller
xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
brcmboard: brcm_board_init entry
DYING GASP IRQ Initialized and Enabled
gpiochip_add: registered GPIOs 0 to 159 on device: bcm_gpio
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe8600 (irq = 64) is a BCM63XX
ttyS1 at MMIO 0xfffe8620 (irq = 65) is a BCM63XX
BPM: tot_mem_size=536870912B (512MB), buf_mem_size <7%> =37580963B (35MB), num of buffers=14498, buf size=2592
Broadcom BPM Module Char Driver v0.1 Oct  5 2020 13:58:17 Registered<244>
u32 classifier
    input device check on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (6970 buckets, 27880 max)
ctnetlink v0.93: registering with nfnetlink.
/proc/net/netfilter/nf_dyndscp_w2ldscp_transtbl created
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Initializing MCPD Module
Ebtables v2.0 registered
L2TP core: blog_l2tp_rcv_check 
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
8021q: 802.1Q VLAN Support v1.8
Could not find GPIO info for WiFi On/Off button in boardparms!
SoftAtHome Button driver has been initialized
UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs"
UBIFS: mounted read-only
UBIFS: file system size:   64249856 bytes (62744 KiB, 61 MiB, 506 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: zlib
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) readonly on device 0:11.
Freeing init memory: 148K
hub 1-0:1.0: over-current condition on port 2
init started: BusyBox v1.13.3 (2020-10-05 13:58:25 UTC)
starting pid 359, tty '': '/etc/init.d/sysinit'

SYSINIT

SoftAtHome HGW version: SHFRSW1.4.12#0
Compiled on kubernetes-slave-brewery-6q7x2, Mon, 05 Oct 2020 14:09:56 +0000
With toolchain gcc version: arm-unknown-linux-gnueabi-gcc (crosstool-NG git+ab5c880 - SoftAtHome 1.0.2) 4.6.2

Mounting tmpfs filesystem (/tmp) ...
Mounting proc filesystem ...
Mounting sys filesystem ...
Mounting tmpfs filesystem (/dev) ...
Mounting tmpfs filesystem (/var) ...
Mounting tmpfs filesystem (/var/log) ...
Mounting usbfs filesystem (/proc/bus/usb) ...
Mounting pstore filesystem (/mnt/pstore) ...
Mounting cgroup filesystem (/sys/fs/cgroup/)
> NORMAL BOOT <

hub 2-0:1.0: over-current condition
UBI: attaching mtd9 to ubi1
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
hub 4-0:1.0: over-current condition on port 2
UBI: max. sequence number:       180
UBI: attached mtd9 to ubi1
UBI: MTD device name:            "misc1"
UBI: MTD device size:            112 MiB
UBI: number of good PEBs:        896
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             683
UBI: total number of reserved PEBs: 213
UBI: number of PEBs reserved for bad PEB handling: 8
UBI: max/mean erase counter: 3/0
UBI: image sequence number:  29569270
UBI: background thread "ubi_bgt1d" started, PID 646
UBI device number 1, total 896 LEBs (113770496 bytes, 108.5 MiB), available 683 LEBs (86724608 bytes, 82.7 MiB), LEB size 126976 bytes (124.0 KiB)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 0, name "user"
UBIFS: file system size:   3174400 bytes (3100 KiB, 3 MiB, 25 LEBs)
UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  149934 bytes (146 KiB)

> BOOT SYSTEM <

UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 1, name "ext"
UBIFS: file system size:   15745024 bytes (15376 KiB, 15 MiB, 124 LEBs)
UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  743676 bytes (726 KiB)
## CV=CONFIG_VERSION_NAME_MAJOR="1.4.12" DB=CONFIG_VERSION_NAME_MAJOR="1.4.12"
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 2, name "perm"
UBIFS: file system size:   3174400 bytes (3100 KiB, 3 MiB, 25 LEBs)
UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  149934 bytes (146 KiB)
sysinit: start rc.sysinit
Mon Oct  5 13:54:32 CEST 2020
Mounting other filesystems ...
Switching to RUNLEVEL 1 ...
removing abort trigger
*********************** Starting script /etc/rc1.d/S00faultmonitor at: 5.40 4.49
*********************** Starting script /etc/rc1.d/S00syslog-ng at: 5.44 4.52
*********************** Starting script /etc/rc1.d/S00syslog-ng-rotate at: 6.07 5.13
*********************** Starting script /etc/rc1.d/S01EnableRebootOnCrash at: 6.10 5.14
panic_on_page_allocation_failure flag is not present in this kernel release...
*********************** Starting script /etc/rc1.d/S01EnableRebootOnOOM at: 6.14 5.17
*********************** Starting script /etc/rc1.d/S01sysbus at: 6.17 5.20
*********************** Starting script /etc/rc1.d/S01sysctl at: 6.35 5.36
*********************** Starting script /etc/rc1.d/S02hardware at: 6.38 5.39
Wifi Forwarding Driver is initialized!
Initializing WLCSM Module
WLCSM Module loaded successfully 
DHD_FKB_POOL size is:1280 and entry size:2592
fkbpool address range: da800000 <-> dab2a000
DHD_PKTTAG POOL size is:1280 and entry size:64
dhd_module_init in
dhd_queue_budget = 256
dhd_sta_threshold = 2048
dhd_if_threshold = 65536
no wifi platform data, skip
dhdpcie_chipmatch: Unsupported vendor 14e4 device a8db
dhdpcie_pci_probe: chipmatch failed!!
PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
dhdpcie_init: can't find adapter info for this chip
PCI: enabling device 0001:01:00.0 (0140 -> 0142)
DHD: dongle ram size is set to 1835008(orig 1835008) at 0x200000
dhd:0: fw path:/etc/wlan/dhd nv path:(null)
Creating CPU ring for queue number 7 with 128 packets descriptor=0xbf11906c
 Done initializing Ring 7 Base=0xffdf3000 End=0xffdf3800 calculated entries= 128 RDD Base=0x00c17000 descriptor=0xbf11906c
RDPA returned tx wakeup reg = <0x80299004>, val = <0x10000000>
RDPA returned rx wakeup reg = <0x8029a004>, val = <0x26000000>
Scratch pad is not initialized.
dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
dhd_attach: wl0: pre-allocated buffer mode is disabled (allocskbsz=0)
dhd_attach(): thread:dhd_watchdog_thread:492 started
dhd_attach(): thread:dhd0_dpc:494 started
dhd_deferred_work_init: work queue initialized 
Creating CPU ring for queue number 0 with 1024 packets descriptor=0xbf28d82c
 Creating CPU ring for queue number 1 with 1024 packets descriptor=0xbf28d848
  wfd_bind: Dev wl%d wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3
Instantiating WFD 0 thread
dhd:0: fw path:/etc/wlan/dhd nv path:(null)
dhd_bus_download_firmware: firmware path=/etc/wlan/dhd, nvram path=
dhdpcie_ramsize_adj: Enter
dhdpcie_ramsize_adj: Adjust dongle RAMSIZE to 0x240000
dhdpcie_download_code_file: download firmware /etc/wlan/dhd/4366c0/rtecdc.bin
wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
wl: ID=pci/1/1/0/
wl: loading /etc/wlan/bcm43664_DG2200TN_map.bin
wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=20
wl: reading /etc/wlan/bcm43664_nvramvars.bin, file size=20
Replace or append with internal Mac Address
dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
PCIe shared addr (0x002a5c2c) read took 52023 usec before dongle is ready
DMA RX offset from shared Area 0
dhdpcie_readshared: Dongle advertizes 2 size indices
dhdpcie_readshared: Host support DMAing indices: H2D:1 - D2H:1. FW supports it
H2D DMA WR INDX : array size 544 = 2 * 266
D2H DMA RD INDX : array size 32 = 2 * 3
D2H DMA WR INDX : array size 32 = 2 * 3
H2D DMA RD INDX : array size 544 = 2 * 266
ring_info_raw: 56 
24 6b 43 00 f4 7b 43 00 08 7e 43 00 1c 80 43 00 
22 80 43 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 0a 01 00 00 
dhdpcie_readshared: max H2D queues 266
dhd_bus_start: Initializing 266 h2drings
dhd_runner_flowmgr_init: bootmem name<dhd0> addr<cc000000> size<14680064>
Scratch pad is not initialized.
Scratch pad is not initialized.
Scratch pad is not initialized.
Scratch pad is not initialized.
dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 01:0512
Scratch pad is not initialized.
dhd_runner_policy_init: N+M Policy = 0 1 (HW)
dhd_bus_cmn_writeshared:
  0000: 00 c0 b3 1c 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 00 c2 00 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 40 f0 1a 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 c0 c1 00 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 80 c2 00 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 00 40 1a 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 10 14 00 
dhd_bus_cmn_writeshared:
  0000: 00 88 ed 1a 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 8c ed 1a 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 80 ed 1a 00 00 00 00 
dhd_bus_cmn_writeshared:
  0000: 00 84 ed 1a 00 00 00 00 
Attach flowrings pool for 264 rings
Runner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>
Initial configuration
=================================
	rx_post_flow_ring_base_addr : c0c20000
	tx_post_flow_ring_base_addr : cbfc4000
	rx_complete_flow_ring_base_addr : c0c28000
	tx_complete_flow_ring_base_addr : c0c1c000

	r2d_wr_arr_base_addr : ffdd4000
	d2r_rd_arr_base_addr : ffdd4402
	r2d_rd_arr_base_addr : ffdd4c00
	d2r_wr_arr_base_addr : ffdd4802
	tx_post_mgmt_arr_base_addr : ffdd5000
	tx_post_mgmt_arr_base_phys_addr : 1aed9000

	r2d_wr_arr_base_phys_addr : 1aed8000
	d2r_rd_arr_base_phys_addr : 1aed8402
	r2d_rd_arr_base_phys_addr : 1aed8c00
	d2r_wr_arr_base_phys_addr : 1aed8802

	Doorbell ISR : bf2b334c
	Doorbell CTX : dcd00e00
Runner DHD Offload initialization complete
dhd_rx_frame: net device is NOT registered. drop event packet
dhd_rx_frame: net device is NOT registered. drop event packet
CUR_ETHERADDR : 6 
98 77 e7 ee 05 08 
dhd_sync_with_dongle: GET_REVINFO device 0x43c5, vendor 0x14e4, chipnum 0xaa90

Dongle Host Driver, version 7.14.164.23.cpe4.16L05.0-kdb
wfd_registerdevice Successfully registered dev wl0 ifidx 0 wfd_idx 0
Broadcom PCI Device 0x6313 has allocated with driver pcieport
Broadcom PCI Device 0x6313 has allocated with driver pcieport
dhd_module_init out
--SMP support
wl: dsl_tx_pkt_flush_len=338
wl: norm_wmark_tot=9423, pktc_wmark_tot=9423
PCI: enabling device 0000:01:00.0 (0140 -> 0142)
wl: passivemode=1
wl1: creating kthread wl1-kthrd
wl: napimode=0
initvars_cis_pci: Not CIS format
Neither SPROM nor OTP has valid image
wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
wl: ID=pci/0/1/0/
wl: loading /etc/wlan/bcm43217_DG2200TN_map.bin
srom rev:8
wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=20
wl1: allocskbmode=1 currallocskbsz=2300
Creating CPU ring for queue number 2 with 1024 packets descriptor=0xbf28d864
 Creating CPU ring for queue number 3 with 1024 packets descriptor=0xbf28d880
  wfd_bind: Dev wl%d wfd_idx 1 wl_radio_idx 1 Type skb configured WFD thread wfd1-thrd minQId/maxQId (10/11), status (0) qmask 0xc
Instantiating WFD 1 thread
wfd_registerdevice Successfully registered dev wl1 ifidx 0 wfd_idx 1
wl1: Broadcom BCM43227 802.11 Wireless Controller 7.14.164.23.cpe4.16L05.0-kdb
dgasp: kerSysRegisterDyingGaspHandler: wl1 registered 
Success
ret code = 0.
ret code = 0.
ret code = 0.
ret code = 0.
ret code = 0.
Note: Loading 6300 MDK (default) driver for 0 chip 
Switch MDK: num_switches = 1
Switch MDK: unit = 1; phy_pbmp = 0xf; config_pbmp = 0xf nophy_pbmp = 0x0
Switch MDK link poll thread: unit=1; phypbmp=0xf config_pbmp=0xf
*********************** Starting script /etc/rc1.d/S03mountpackages at: 9.59 8.12
Mount using the default checks
*********************** Starting script /etc/rc1.d/S05hgwcfg_init at: 9.65 8.13
*********************** Starting script /etc/rc1.d/S06switch at: 9.69 8.17
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
Success
*********************** Starting script /etc/rc1.d/S07ebttcpmss at: 9.79 8.26
*********************** Starting script /etc/rc1.d/S07iptables-smod at: 9.84 8.31
*********************** Starting script /etc/rc1.d/S08ebtables at: 9.93 8.39
*********************** Starting script /etc/rc1.d/S10netmodeconfig1 at: 10.04 8.50
*********************** Starting script /etc/rc1.d/S10usermngt at: 10.29 8.80
*********************** Starting script /etc/rc1.d/S17faultmonitorplugin at: 10.43 8.92
*********************** Starting script /etc/rc1.d/S17led_plugin at: 10.48 8.96
*********************** Starting script /etc/rc1.d/S19dhcpv6client at: 10.54 9.01
*********************** Starting script /etc/rc1.d/S20nemo-core at: 10.61 9.07
*********************** Starting script /etc/rc1.d/S20nemo_wlan at: 11.04 9.44
*********************** Starting script /etc/rc1.d/S20network at: 11.10 9.49
*********************** Starting script /etc/rc1.d/S21dsl at: 11.14 9.52
*********************** Starting script /etc/rc1.d/S21generate_key at: 11.29 9.63
Verifying device certificate
WARNING: can't open config file: /openssl/openssl.cnf
/perm/certs/cpe_device.crt.pem: OK
Private device key for CPE WAN_ADDR 98:77:E7:EE:05:07 already exist. No private key generation
A device certificate already exists for CPE WAN_ADDR 98:77:E7:EE:05:07
*********************** Starting script /etc/rc1.d/S21netdev at: 11.55 9.71
*********************** Starting script /etc/rc1.d/S21netmaster at: 11.93 9.96
Line 0: xDSL link down
*********************** Starting script /etc/rc1.d/S21www-backend at: 12.48 10.33
*********************** Starting script /etc/rc1.d/S22firewall at: 12.56 10.40
*********************** Starting script /etc/rc1.d/S22netmodeconfig3 at: 13.01 10.79
*********************** Starting script /etc/rc1.d/S22nmc_led at: 13.30 10.93
*********************** Starting script /etc/rc1.d/S23bcmeth at: 13.49 10.99
*********************** Starting script /etc/rc1.d/S23nemo-clients at: 13.53 11.01
*********************** Starting script /etc/rc1.d/S23raplugin at: 13.59 11.04
*********************** Starting script /etc/rc1.d/S24netmodeconfigqos at: 13.85 11.09
*********************** Starting script /etc/rc1.d/S25dnsplugin at: 14.06 11.11
*********************** Starting script /etc/rc1.d/S25kmcd at: 14.18 11.12
*********************** Starting script /etc/rc1.d/S25pppd at: 14.82 11.51
*********************** Starting script /etc/rc1.d/S28dhcpv6server at: 14.95 11.58
*********************** Starting script /etc/rc1.d/S40conntrack_plugin at: 15.03 11.63
*********************** Starting script /etc/rc1.d/S42fuse at: 15.15 11.70
*********************** Starting script /etc/rc1.d/S43dropbearkey at: 15.21 11.73
*********************** Starting script /etc/rc1.d/S45dhcp at: 15.24 11.76
*********************** Starting script /etc/rc1.d/S45netmodeconfig4 at: 15.52 11.96
*********************** Starting script /etc/rc1.d/S48lxc at: 15.56 12.00
*********************** Starting script /etc/rc1.d/S50deviceinfo at: 15.59 12.03
hco_upgrade_get_partition_info part_type(PART_TYPE_NORM) bufflen(64)
hco_upgrade_get_partition_info: Version Len(8) Version String(1.4.12.0)
hco_upgrade_get_partition_info success version(1.4.12.0)
hco_upgrade_get_partition_info part_type(PART_TYPE_RESC) bufflen(64)
Error fetching the softco version
hco_upgrade_get_partition_info failed 1
*********************** Starting script /etc/rc1.d/S50devicemngt at: 16.58 12.98
*********************** Starting script /etc/rc1.d/S50mqttmessages at: 16.65 13.03
*********************** Starting script /etc/rc1.d/S50nmc_wlan at: 16.77 13.03
*********************** Starting script /etc/rc1.d/S50wld_bcm at: 16.87 13.08
*********************** Starting script /etc/rc1.d/S70avahi at: 17.23 13.39
*********************** Starting script /etc/rc1.d/S71gmap at: 17.38 13.47
Loading gmap modules ...
gMap started.
*********************** Starting script /etc/rc1.d/S71manifest at: 17.72 13.50
*********************** Starting script /etc/rc1.d/S72netmodeconfig2 at: 18.34 13.51
*********************** Starting script /etc/rc1.d/S73eventmanager at: 18.60 13.51
*********************** Starting script /etc/rc1.d/S73httpd at: 18.71 13.51
*********************** Starting script /etc/rc1.d/S74devdiscd at: 18.86 13.51
*********************** Starting script /etc/rc1.d/S75mqttbroker at: 19.04 13.51
*********************** Starting script /etc/rc1.d/S76pwrledstop at: 19.15 13.51
*********************** Starting script /etc/rc1.d/S78dyndns at: 19.22 13.51
*********************** Starting script /etc/rc1.d/S78time-plugin at: 19.32 13.52
*********************** Starting script /etc/rc1.d/S85scheduler at: 19.58 13.56
*********************** Starting script /etc/rc1.d/S87usbhosts at: 19.82 13.56
*********************** Starting script /etc/rc1.d/S90tod at: 19.95 13.56
*********************** Starting script /etc/rc1.d/S90wakeonlan at: 22.07 14.21
*********************** Starting script /etc/rc1.d/S90wlanscheduler at: 22.16 14.21
*********************** Starting script /etc/rc1.d/S91cups-plugin at: 22.28 14.21
*********************** Starting script /etc/rc1.d/S97dbus at: 22.48 14.21
Starting system message bus
*********************** Starting script /etc/rc1.d/S98cwmp at: 22.61 14.21
*********************** Starting script /etc/rc1.d/S98dnssd at: 22.81 14.21
*********************** Starting script /etc/rc1.d/S98location at: 22.98 14.21
*********************** Starting script /etc/rc1.d/S98pass at: 23.06 14.21
cp: omitting directory '/usr/share/ca-certificates//pass'
*********************** Starting script /etc/rc1.d/S98remoteaccess at: 23.50 14.25
*********************** Starting script /etc/rc1.d/S98speedtest at: 23.63 14.25
*********************** Starting script /etc/rc1.d/S98ssw at: 23.81 14.25
*********************** Starting script /etc/rc1.d/S98storage at: 24.13 14.26
*********************** Starting script /etc/rc1.d/S98upgraded at: 24.58 14.26
*********************** Starting script /etc/rc1.d/S98webuiupgrade_plugin at: 24.83 14.26
*********************** Starting script /etc/rc1.d/S99conmon at: 25.21 14.26
*********************** Starting script /etc/rc1.d/S99dhd_monitor at: 25.38 14.27
dhd_monitor launch
*********************** Starting script /etc/rc1.d/S99ieee1905-registrar at: 25.45 14.27
*********************** Starting script /etc/rc1.d/S99invoc at: 25.71 14.27
*********************** Starting script /etc/rc1.d/S99ippingdiagnostics at: 25.91 14.27
*********************** Starting script /etc/rc1.d/S99nmc_automqtt at: 26.08 14.27
*********************** Starting script /etc/rc1.d/S99oopstracker at: 26.29 14.27
*********************** Starting script /etc/rc1.d/S99pbsync at: 26.41 14.27
*********************** Starting script /etc/rc1.d/S99pkgmgr at: 26.52 14.27
*********************** Starting script /etc/rc1.d/S99probe at: 26.66 14.27
chown: unknown user/group figaro:pcb_users
*********************** Starting script /etc/rc1.d/S99processmonitor at: 26.88 14.27
*********************** Starting script /etc/rc1.d/S99pure-ftpd at: 27.02 14.27
*********************** Starting script /etc/rc1.d/S99sahpairing at: 27.18 14.27
*********************** Starting script /etc/rc1.d/S99saveflush at: 27.50 14.27
*********************** Starting script /etc/rc1.d/S99transfer_client at: 27.66 14.27
*********************** Starting script /etc/rc1.d/S99upnp-igd at: 27.95 14.27
*********************** Starting script /etc/rc1.d/S99upnpdiscd at: 28.06 14.28
*********************** Starting script /etc/rc1.d/S99usbupgrade at: 28.14 14.28
*********************** Starting script /etc/rc1.d/S99watchdog at: 28.32 14.28
Sysinit done.

Please press Enter to activate this console. 

Pictures

User Images
Internal

See also

Models

KAONMEDIA