Keebox W150NR v1

multiple revisions of this device, use caution

bgn (N150)
wireless router
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Keebox W150NR
FCC ID	YC3W150NR
Type	wireless router
CPU1	Ralink RT3050
CPU1 Type	MIPS 24KEc
CPU1 Speed	320 MHz 16-bit
Flash1 Chip	Spansion S29GL032N90TFI04
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Nanya NT5SV16M16BS-6K
ETH chip1	Ralink RT3050
Switch	Ralink RT3050
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:14:D1 (34 E, 46 W) Ethernet OUI: 00:14:D1 (34 E, 46 W)
Stock bootloader	U-Boot 3.1a Ralink
Stock FW OS	Linux 2.6.21
Expansion IF types	none specified
Power	5 VDC, 1.2 A
Connector type	barrel 5 mm (OD) 2 mm (ID) 10 mm (LEN)
Serial Port (UART)	yes, (57600 8N1)
Flags: boot log
Other
Default SSID: KEEBOX W150NR Default IP address: 192.168.10.1 the IP 192.168.10.1 is used by 124 additional devices of which 0 are Keebox devices Default login user: admin Default login password: blank admin:blank credentials used by 366 additional devices of which 0 are Keebox devices
Manuf/OEM/ODM	Alpha Networks WRG-N23
Retail
FCC approval date	21 July 2010
UPC	857183002013 (UPC DB, On eBay)
ASIN	B004FM93CU
Country of manuf	China
Radio 1
Chip1	Ralink RT3050
Wireless interface OUI	00:14:D1
Antenna Connector Type	RP-SMA
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Keebox W150NR v1 Ralink Ralink Keebox W150NR v2 Ralink Ralink

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

OEM/ODM Alpha Networks WRG-N23 (8WRGN23..3A1G)

The D-Link DIR-300 rev B1 is also a WRG-N23.

On the DD-WRT forums

This device appears to be able to use the DIR-300vB firmware.

The included power adapter is an Amigo AM51-0501200FU. ID/OD/Len measurements are approximate.

The ASIN and UPC for this device is probably identical the v2.

Links of Interest

Downloads

JTAG-Serial Info

Serial

Boot log

U-Boot 1.1.3 (Jan 13 2009 - 17:40:14) (Alpha) - SVN revision : 105 Model: WRGN23 Board: RT2880 DRAM: 32 MB twe0 set to <NULL> toe0 set to <NULL> ============================================ Ralink UBoot Version: 3.1 Alpha -------------------------------------------- ASIC 3052_MP2 (MAC to GigaMAC Mode) DRAM COMPONENT: 256Mbits DRAM BUS: 16BIT Total memory: 32Mbytes Date:Jan 13 2009 Time:17:40:14 ============================================ icache: sets:128, ways:4, linesz:32 ,total:16384 dcache: sets:128, ways:4, linesz:32 ,total:16384 Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 9: Load Boot Loader code then write to Flash via TFTP. You choosed (0) 0 seconds ... Eth0 (10/100-M) : ethaddr = (00:14:d1:7d:19:ea) 00 14 D1 7D 19 EA 3: System Boot system code via Flash. ## Powering down port 0 ~ 3. ## Booting image at bf050000 ... We have SEAMA, Image Size = 3223584 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK ## Transferring control to Linux (at address bf05000c) ... ## Giving linux memsize in MB, 32 Starting kernel ... Linux version 2.6.21 (tomcat@enzo) (gcc version 3.3.5) #1 Tue Jun 29 11:41:20 CST 2010 The CPU feqenuce set to 320 MHz CPU revision is: 0001964c Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Built 1 zonelists. Total pages: 8128 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock1 noinitrd Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). Cache parity protection disabled arch_init_irq: cause = 80800004, status = 1100ff00 PID hash table entries: 128 (order: 7, 512 bytes) mips_time_init: calculating r4koff ... 0x00138800 (1280000) CPU frequency 320.00 MHz Using 160.000 MHz high precision timer. Console: colour dummy device 80x25 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 29080k/32768k available (2546k kernel code, 3688k reserved, 533k data, 120k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher squashfs: LZMA suppport for slax.org by jro io scheduler noop registered io scheduler deadline registered (default) FLASH_API: MAN_ID=1 DEV_ID=7E1A00 SIZE=4MB rt3052 access driver initialization. Ralink gpio driver initialized HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A ra2880_read_mac: 00:00:00:00:00:00 ra2880_read_mac: 00:00:00:00:00:00 Ralink APSoC Ethernet Driver Initilization. v1.60 256 rx/tx descriptors allocated, mtu = 1536! ra2880_read_mac: 00:00:00:00:00:00 ra2880_read_mac: 00:00:00:00:00:00 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 elbox physmap platform flash device: 00400000 at bfc00000 elbox-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. elbox-flash.0: the flash image has SEAMA header elbox-flash.0: squashfs filesystem found at offset 1310784 Creating 8 MTD partitions on "elbox-flash.0": 0x00140060-0x00363060 : "rootfs" 0x00050000-0x003f0000 : "upgrade" 0x00040000-0x00050000 : "devconf" 0x00030000-0x00040000 : "devdata" 0x003f0000-0x00400000 : "langpack" 0x00000000-0x00400000 : "flash" 0x00000000-0x00030000 : "u-boot" 0x00030000-0x00038000 : "boot env" u32 classifier Performance counters on ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux ipt_time loading TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 120k freed init started: BAlgorithmics/MIPS FPU Emulator v1.5 usyBox v1.14.1 (2010-06-29 11:41:45 CST) starting pid 273, tty '': '/etc/init.d/rcS' [/etc/init.d/S10init.sh] [/etc/init.d/S16ipv6.sh] [/etc/init.d/S19init.sh] [/etc/init.d/S20init.sh] DEVCONF: no config data available (ret=-1) ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! Uable to read device config. !! !! Setting is reset to factory default. !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DEFNODE[/etc/defnodes/S10phyinf.php] DEFNODE[/etc/defnodes/S11devdata.xml] DEFNODE[/etc/defnodes/S12flashspeed.php] DEFNODE[/etc/defnodes/S20device.xml] DEFNODE[/etc/defnodes/S22timezone.php] [/etc/scripts/setdate.sh] 01/01/2000 ... Sat Jan 1 16:00:02 PST 2000 DEFNODE[/etc/defnodes/S30device.php] DEFNODE[/etc/defnodes/S30device.xml] DEFNODE[/etc/defnodes/S31diagnostic.xml] DEFNODE[/etc/defnodes/S31locale.php] DEFNODE[/etc/defnodes/S32layout.php] DEFNODE[/etc/defnodes/S33wifi.php] DEFNODE[/etc/defnodes/S40device.xml] DEFNODE[/etc/defnodes/S90sessions.php] DEFNODE[/etc/defnodes/S90upnpigd.php] DEFNODE[/etc/defnodes/S90upnpwfa.php] SERVD: start service [LOGD] [/etc/init.d/S20interfaces.sh] ra2880_read_mac: 00:14:d1:7d:19:eb Port status change [/etc/init.d/S45gpiod.sh] [/etc/init.d/S50config.sh] [/etc/init.d/rcS] done! Factory reset time : 3 secs SERVD: event [WANPORT.LINKDOWN] not found! [/etc/init0.d/S21layout.sh]: start ... SERVD: start service [LAYOUT] [/etc/init0.d/S21wlan.sh]: start ... [/etc/init0.d/S40event.sh]: start ... eth2.0: Setting MAC address to 00 14 d1 7d 19 ea. device eth2 entered promiscuous mode VLAN (eth2.0): Setting underlying device (eth2) to promiscious mode. eth2.2: Setting MAC address to 00 14 d1 7d 19 eb. VLAN (eth2.2): Underlying device (eth2) has same MAC, not checking promiscious mode. eth2.0: dev_set_promiscuity(master, 1) device eth2.0 entered promiscuous mode interface ra0 does not exist! bridge br1 doesn't exist! SERVD: event [SEALPAC.LOAD/default] SEAMA: '/dev/mtdblock/5' is not a seama file ! br0: port 1(eth2.0) entering learning state br0: topology change detected, propagating br0: port 1(eth2.0) entering forwarding state [/etc/init0.d/S40gpioevent.sh]: start ... SERVD: start service [WIFI.WLAN-1] SERVD: start service [WIFI.WLAN-2] [/etc/init0.d/S41autowan.sh]: start ... [/etc/init0.d/S41inf.sh]: start ... SERVD: start service [LOGD] SERVD: service [LOGD] is already started. SERVD: start service [PHYINF.ETH-1] [/etc/init0.d/S42pthrough.sh]: start ... [/etc/init0.d/S65ddnsd.sh]: start ... [/etc/init0.d/S80telnetd.sh]: start ... [/etc/init0.d/rcS] done! Please press Enter to activate this console. SERVD: start service [PHYINF.ETH-2] SIOCSIFHWADDR: Device or resource busy SERVD: start service [WIFI] rmmod: can't unload 'rt2860v2_ap': unknown symbol in module, or unknown parameter rt2860v2_ap: module license 'unspecified' taints kernel. === pAd = c0405000, size = 428784 === <-- RTMPAllocAdapterBlock, Status=0 RX DESC a1fed000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff 00 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l Main bssid = 00:14:d1:7d:19:ea <==== rt28xx_init, Status=0 0x1300 = 00064380 SERVD: event [WLAN-1.UP/default] SERVD: event [WLAN-2.UP] not found! device ra0 entered promiscuous mode br0: port 2(ra0) entering learning state br0: topology change detected, propagating br0: port 2(ra0) entering forwarding state br0: port 2(ra0) multicast bandwidth 900kbps [/etc/scripts/wps.sh] setie ... Configuration file: /var/servd/hostapd-ra0.conf Using interface ra0 with hwaddr 00:14:d1:7d:19:ea and ssid 'KEEBOX W150NR' hostapd_setup_interface: return 0 SERVD: start service [WIFI] SERVD: service [WIFI] is already started. SERVD: stop service [MULTICAST] SERVD: service [MULTICAST] is already stopped. SERVD: start service [MULTICAST] SERVD: start service [BRIDGE] BRIDGE: The device is not in the bridge mode. SERVD: start service [LAN] SERVD: start service [WAN] SERVD: start service [DEVICE.PASSTHROUGH] SERVD: start service [IPTABLES] REDSonic turbo net initialized Network interface reset count v1.0 /proc/sys/net/netfilter/nf_conntrack_udp_timeout: can't create SERVD: start service [IP6TABLES] ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found ip6tables: not found SERVD: start service [IPTABLES] SERVD: service [IPTABLES] is already started. SERVD: start service [IP6TABLES] SERVD: service [IP6TABLES] is already started. SERVD: start service [INET.LAN-1] [/var/servd/INET.LAN-1_start.sh]: starting LAN-1... SIOCSIFMTU: No such device SERVD: event [LAN-1.UP/default] [/var/servd/INET.LAN-1_start.sh]: starting LAN-1 done !!! SERVD: start service [IPTMACCTRL] SERVD: start service [IPTURLCTRL] SERVD: start service [IPTPORTT] SERVD: start service [IP6T.LAN-1] ip6tables: not found ip6tables: not found SERVD: start service [IPTABLES] SERVD: service [IPTABLES] is already started. SERVD: start service [IP6TABLES] SERVD: service [IP6TABLES] is already started. SERVD: start service [INET.WAN-1] [/var/servd/INET.WAN-1_start.sh]: starting WAN-1... wireless_event_receive: Malformed netlink message: len=260 left=256 plen=244 [/var/servd/INET.WAN-1_start.sh]: starting WAN-1 done !!! SERVD: start service [INET.WAN-2] ifsetup: (WAN-2) not active. SERVD: service [INET.WAN-2] return error 8. SERVD: start service [IPTMASQ] /proc/sys/net/ipv4/ip_personality_sport: can't create /proc/sys/net/ipv4/ip_personality_enable: can't create SERVD: start service [IPTVSVR] SERVD: start service [IPTPFWD] SERVD: start service [IPTPORTT] SERVD: service [IPTPORTT] is already started. SERVD: start service [IPTDMZ] IPTDMZ: cnt= 1 SERVD: start service [IPT.WAN-1] SERVD: start service [IP6T.WAN-1] ip6tables: not found ip6tables: not found SERVD: service [IP6T.WAN-1] return error 127. SERVD: start service [IPT.WAN-2] SERVD: start service [IP6T.WAN-2] ip6tables: not found ip6tables: not found SERVD: service [IP6T.WAN-2] return error 127. SERVD: stop service [IPT.LAN-1] SERVD: service [IPT.LAN-1] is already stopped. SERVD: start service [IPT.LAN-1] SERVD: stop service [INFSVCS.LAN-1] SERVD: service [INFSVCS.LAN-1] is already stopped. SERVD: start service [INFSVCS.LAN-1] SERVD: event [INFSVCS.LAN-1.UP/default] SERVD: event [STATUS.READY/default] SERVD: start service [HTTP.LAN-1] SERVD: start service [UPNP.LAN-1] SERVD: event [UPNP.ALIVE.LAN-1/default] SERVD: start service [DHCPS4.LAN-1] SERVD: start service [DNS4.LAN-1] SERVD: stop service [ROUTE.STATIC] SERVD: service [ROUTE.STATIC] is already stopped. SERVD: start service [ROUTE.STATIC] SERVD: stop service [MULTICAST] SERVD: start service [MULTICAST] SERVD: stop service [IPTDEFCHAIN] SERVD: service [IPTDEFCHAIN] is already stopped. SERVD: start service [IPTDEFCHAIN] SERVD: stop service [IP6TDEFCHAIN] SERVD: service [IP6TDEFCHAIN] is already stopped. SERVD: start service [IP6TDEFCHAIN] ip6tables: not found ip6tables: not found SERVD: stop service [LLD2] SERVD: service [LLD2] is already stopped. SERVD: start service [LLD2] SERVD: stop service [HTTP] SERVD: service [HTTP] is already stopped. SERVD: start service [HTTP] SERVD: event [HTTP.UP] not found! SERVD: stop service [DNS] SERVD: service [DNS] is already stopped. SERVD: start service [DNS] killall: dnsmasq: no process killed

Pictures

User Images

• 

  board top