Keyence NE-W01E

From TechInfoDepot
Jump to navigationJump to search
b (B11)
access point
WikiDevi.wi-cat.ru Keyence NE-W01E
3rd Party Firmware
dd-wrt Incompatible
OpenWrt Incompatible
Tomato any flavor Incompatible
Platform
BrandModelRev Keyence NE-W01E
FCC ID RF40718
Type access point
CPU1 checkY Ubicom IP2022
CPU1 Type Ubicom 32
CPU1 Speed not specified
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Ubicom IP2022
Ethernet Port Count 1-10MbE-LAN
Wired Standard IEEE 802.3i

802dot11 OUI: 00:01:FC
Ethernet OUI: 00:01:FC

Expansion IF types PCMCIA (16-bit)
PCMCIA slots 1
Power 100-240 VAC ~ 50/60 Hz, ? A
Connector type power leads only
Other

Default SSID: KeyenceWLAN
Default IP address: 192.168.0.13

Retail
Availability unreleased?
FCC approval date 30 September 2003
Radio 1
Radio1 module unknown
Radio1 module IF PCMCIA (16-bit)
Chip1 Brand? Model?
Wireless interface OUI 00:01:FC
Antenna Connector Type RP-SMA
Wireless Standard IEEE 802.11b
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.

11 Mbps - 2.4GHz 802.11b = B11 class

Overview

There is no view of the wireless module's internals within the FCC filing. It does, however, appear to be a Z-Com card.

Default settings used in this entry are per the FCC manual.

Per one of the FCC EUT's MAC labels, a 00:01:FC (Keyence) OUI is presumed to be used for both interfaces.

There are about 50 uses of a 00:01:FC OUI within WiGLE as of 2013-11-05.