La Fonera 2.0g FON2202
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |||||
---|---|---|---|---|---|
access point | |||||
InfoDepot Wiki | |||||
3rd Party Firmware | |||||
dd-wrt | |||||
OpenWrt | |||||
Tomato any flavor |
Incompatible | ||||
Gargoyle |
Status Unknown | ||||
Platform | |||||
Brand • Model • Rev |
Fon Wireless La Fonera 2.0g FON2202 | ||||
FCC ID | |||||
Type |
access point | ||||
CPU1 |
Atheros AR2315A | ||||
CPU1 Type |
MIPS 4KEc | ||||
CPU1 Speed |
180 MHz | ||||
Flash1 Chip |
Macronix MX25L6405DMI-12G | ||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
RAM1 Chip |
SK hynix HY57V561620FTP-H | ||||
ETH chip1 |
Atheros AR2315A | ||||
Switch |
Marvell 88E6060 | ||||
Ethernet Port Count |
1-WAN 1-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
Stock bootloader |
RedBoot | ||||
Stock FW OS |
Linux | ||||
Expansion IF types |
USB 2.0 | ||||
USB ports |
1 | ||||
USB Hub Compatible |
Untested | ||||
Power |
7.5 VDC, 1 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
4-pin header, populated, (9600 8N1) | ||||
JTAG Port |
14-pin header, unpopulated | ||||
Additional chips | |||||
Other | |||||
Default SSID: MyPlace (4 addl. devices) | |||||
3rd Party Firmware Support | |||||
Retail | |||||
Availability | End of Life | ||||
FCC approval date | 04 June 2007 | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 |
Atheros AR2315A | ||||
Wireless interface OUI |
00:18:84 | ||||
Antenna Connector Type |
RP-SMA | ||||
Wireless Standard |
IEEE 802.11b/g | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = FON version
Please insert instructions here
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 10.03
Current supported version: 15.05
On the OpenWrt Wiki
Support started version: 10.03
Current supported version: 15.05
Please insert instructions here
Categories:
- Fon Wireless
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR2315A
- Atheros
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System Marvell
- Embedded System 88E6060
- Marvell
- OpenWrt Supported
- DD-WRT Supported
- Gargoyle Supported
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation