Laird WB45NBT
From TechInfoDepot
Jump to navigationJump to search
| abgn (AN300) | |
|---|---|
| Bluetooth and WiFi Module | |
 | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Laird WB45NBT |
| FCC ID | SQG-WB45NBT |
| Type | module |
CPU1  | Atmel AT91SAM9G25 |
| CPU1 Type | ARM926EJS |
| CPU1 Speed | 400 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (LPDDR) |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Atmel AT91SAM9G25 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| Power | 3.3 VDC, ? A |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | Atheros AR6003 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 1x1:1 |
| Wireless Standard | IEEE 802.11a/b/g/n |
| 802.11n | up to 150/150 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 2.4 or 5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Target: at91
Subtarget: sam9x
Package architecture: arm_arm926ej-s
Supported Since Commit
Support started version: 18.06.1
Current supported version: 25.12.0
Subtarget: sam9x
Package architecture: arm_arm926ej-s
Supported Since Commit
Support started version: 18.06.1
Current supported version: 25.12.0
WLAN Hardware: Qualcomm Atheros AR6003
Installation method(s):
unknown
Recovery method(s):
unknown
Installation method(s):
unknown
Recovery method(s):
unknown
| git • >> |
|---|
at91: add support for the WB45N module from Laird This module from Laird includes the following: - CPU Atmel SoC ARM926EJS - Wifi AR6003 - Bluetooth CSR8510 - RAM 64MB LPDDR - FLASH 128MB The flash is a dual image layout, kernel a/b, rootfs a/b, and a user partition. |
Categories:
- Laird
- Embedded system/module
- Embedded System Atmel
- Embedded System AT91SAM9G25
- Atmel
- Embedded System ARM926EJS
- Embedded System
- OpenWrt Supported
- Embedded System Atheros
- Embedded System AR6003
- Atheros
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
