SiPEED Lichee Pi Nano

multiple revisions of this device, use caution

bgn (N150)
Development Board
Homepage	Product page
WikiDevi.wi-cat.ru	Lichee Pi Nano
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	SiPEED Lichee Pi Nano
FCC ID	none specified
Type	development board, single-board computer
CPU1 N	Allwinner F1C100s
CPU1 Type	ARM926EJS
CPU1 Speed	408 MHz
Flash1 Chip	XTX Tech XT25F128B
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Allwinner F1C100s
802dot11 OUI: none specified
Expansion IF types	USB 2.0 (OTG), Micro SD Card slot
USB ports	1
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	5 VDC, 2 A
Connector type	USB 2.0 (Female Micro-B)
Serial Port (UART)	yes, via GPIO header, 3.3V TTL, (115200 8N1)
Flags: Micro SD Card slot, RGB LCD FPC, SPI, I2C, UART
Additional chips 4-Wire Touch Screen Controller w/ I2C Interface;Nsiway;NS2009;;1; Low Power Low Dropout Voltage Regulator;Natlinear;LN6206;;1; 3 Channel DC/DC Step-Down PMU;TOLL Micro;TMI7003;;1; White LED Step-Up Converter;PowTech;PT4103;;1;
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date	August 2018
Newegg	9SIB33YHYF3354
ASIN	B08JQHBYJQ
Country of manuf	China
Radio 1
Radio1 module	unknown
Radio1 module IF	SDIO
Chip1	Espressif ESP8089
Wireless interface OUI	none specified
Antenna Connector Type	soldered
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand SiPEED Lichee Pi 3A SpacemiT AIC SiPEED Lichee Pi 4A Alibaba T-Head Realtek SiPEED Lichee Pi Nano Allwinner Espressif SiPEED Lichee Pi Zero (Gen 2) Allwinner Realtek

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Espressif chipsets with specifications, see Espressif.

For a list of all currently documented SiPEED devices with specifications, see SiPEED.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

See also: List of Single-board computers

Hardware specification

• CPU: Allwinner F1C100s @408MHz

SoC: ARM (926EJS)

• Storage: 16MB (NOR) Flash,

TF card (max.128GB)/MMC card

• Memory: 32MB (DDR) integrated
• Wi-Fi: Espressif ESP8089 (802.11bgn)
• USB: 1x USB 2.0 (OTG) port

Links of Interest

• Lichee Nano on SiPEED Wiki
• LicheePi Nano on Linux-Sunxi Wiki
• LicheePi Nano is an SD Card Sized Linux Board on CNX|Software

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: sunxi
Subtarget: arm926ejs
Package architecture: arm_arm926ej-s
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.2

WLAN Hardware: Espressif ESP8089
WLAN Comment: 1x1:1 MIMO
Installation method(s):
SD card
Recovery method(s):
SD card

git • >>

base-files: improve Dell EMC Edge620 (x86) product support This adds auto-configuration of network ports on Dell EMC Edge620 (x86) product. It is similar in specs/features to some of the Sophos x86-based appliances, but: 1. Serial console terminal is built in and requires just the micro-USB cable 2. Comes with both MMC (16Gb) and SSD (256Gb) installed 3. Comes with 6 ethernet ports all 6 are functional when no SFP is used 4. Comes with two SFP cages and not one, like some of revision 3 Sophos products 5. Unlike Sophos devices, there are no non-wireless models of Edge 620, it comes with Qualcomm Atheros QCA9880 radio These devices can be now found both second-hand and new at online marketplaces below (sometimes well below) US $100, I believe they make great candidates for running OpenWrt. The ethernet network ports on the case are marked GE1 thru to GE6 with the following mapping once booted into OpenWrt: ``` GE1: eth2: pci0000:00/0000:00:0b.0/0000:02:00.2 GE2: eth3: pci0000:00/0000:00:0b.0/0000:02:00.3 GE3: eth0: pci0000:00/0000:00:0b.0/0000:02:00.0 GE4: eth1: pci0000:00/0000:00:0b.0/0000:02:00.1 GE5: eth7: pci0000:00/0000:00:17.0/0000:07:00.1 GE6: eth6: pci0000:00/0000:00:17.0/0000:07:00.0 ``` Dell's instructions for [standard configuration](https://infohub.delltechnologies.com/en-us/l/dell-emc-edge-620-advanced-activation-guide/dell-emc-sd-wan-edge-620-standard-configuration/) recommend using GE3, GE4, GE5, or GE6 for WAN, I've selected the GE6 as the sole WAN port under OpenWrt with the rest of ethernet ports assigned to LAN. Please merge before 24.xx is forked and if possible, cherry-pick for 23.05 if there's no ETA for 24.xx forking. PS. @Hurricos I'm struggling with ixgbe mappings on Sophos devices which use very similar hardware to Dell EMC, so even tho I know the sys paths for ethernet ports, I'd prefer to do a separate commit to properly map ethernet ports to match the case markings for this device at some point later.

Pictures

User Images

• 
  Board top
• 
  Board bottom

See also

Models

Hardware

• Lichee RV D1
• Lichee RV Dock
• Lichee Pi Nano
• Lichee Pi Zero
• Lichee Pi Zero (Gen 2)
• Lichee Pi Zero Plus

Model	Lichee RV D1	Lichee Pi Zero Plus	Lichee Pi Zero	 Lichee Pi Nano
SoC	Allwinner D1	Allwinner S3		Allwinner V3s	 Allwinner F1C100s
CPU	C906		ARM (Cortex-A7)		ARM (Cortex-A7)	 ARM (926EJS)
Freq	1.0GHz		1.2GHz			1.2GHz (max)	 600MHz (max)
RAM	512MB DDR3	128MB DDR3		64MB DRAM	 32MB DDR
Flash	SD NAND		SD NAND,SPI NOR,eMMC 	SPI SOP8 	 16MB NOR