LinkSprite pcDuino3 Nano
From TechInfoDepot
Jump to navigationJump to searchSingle Board Computer | |||||||||||||
Homepage | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
LinkSprite pcDuino3 Nano | ||||||||||||
Type |
single-board computer | ||||||||||||
CPU1 | |||||||||||||
CPU1 Speed |
1.0 GHz ( 2 cores ) | ||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||
Flash1 Size |
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (NAND) | ||||||||||||
RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> | ||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||
ETH chip1 | |||||||||||||
ETH chip2 |
Realtek RTL8211F | ||||||||||||
Ethernet Port Count |
1-1GbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||
| |||||||||||||
Stock bootloader |
U-Boot | ||||||||||||
Expansion IF types |
microSDHC, USB 2.0, USB OTG, HDMI | ||||||||||||
USB ports |
2 | ||||||||||||
SD/MMC Slots |
1 | ||||||||||||
HDMI |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Power |
5 VDC, 2 A | ||||||||||||
Connector type |
USB Female Micro-B | ||||||||||||
Serial Port (UART) |
yes, 3.3, (115200 8N1) | ||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support | |||||||||||||
|
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented LinkSprite device with specifications, see LinkSprite.
Links of Interest
https://linux-sunxi.org/LinkSprite_pcDuino3_Nano
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: sunxi
OpenWrt Subtarget: cortexa7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 21.02.0
Current supported version: 23.05.5
OpenWrt Target: sunxi
OpenWrt Subtarget: cortexa7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 21.02.0
Current supported version: 23.05.5
Please insert instructions here