Linksys E1200 v1
From TechInfoDepot
(Redirected from Linksys E1200)
Jump to navigationJump to searchbgn (N300) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless N300 Router | |||||||||||||
Support | |||||||||||||
Wikipedia | |||||||||||||
InfoDepot Wiki | |||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | |||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Linksys E1200 v1 | ||||||||||||
Serial number prefix |
1081 | ||||||||||||
FCC ID | |||||||||||||
IC ID | |||||||||||||
Type |
wireless router | ||||||||||||
CPU1 |
Broadcom BCM5357B0 | ||||||||||||
CPU1 Type |
MIPS 74K | ||||||||||||
CPU1 Speed |
not specified | ||||||||||||
Flash1 Chip |
Macronix MX25L3206E | ||||||||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||
RAM1 Chip |
Winbond W9425G6JH-5 | ||||||||||||
ETH chip1 |
Broadcom BCM5357B0 | ||||||||||||
Switch |
Broadcom BCM5357B0 | ||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3/3u | ||||||||||||
Expansion IF types |
none specified | ||||||||||||
Power |
12 VDC, 0.5 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Serial Port (UART) |
yes | ||||||||||||
Other | |||||||||||||
Default IP address: 192.168.1.1 | |||||||||||||
Manuf/OEM/ODM | |||||||||||||
3rd Party Firmware Support |
DD-WRT • (List) , OpenWrt (Was) , Tomato (Hyzoom) • (Tomato (Shibby) mod) , Tomato (Shibby) • (List | DLs) | ||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
End of Life date | 2017 | ||||||||||||
FCC approval date | 07 January 2011 | ||||||||||||
ASIN |
B004T9RR6I , multiple uses | ||||||||||||
Country of manuf | China | ||||||||||||
Physical | |||||||||||||
Dimensions |
7.43" x 1.23" x 5.97" | ||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Broadcom BCM5357B0 | ||||||||||||
Wireless interface OUI |
58:6D:8F, C0:C1:C0 | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
MIMO status |
2x2:2 | ||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys device with specifications, see Linksys.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
E1200 v1 serial numbers may start with 1081
Links of Interest
- On the DD-WRT forums (part numbers and board image)
- "3763-11400102R" is silkscreened on the board.
- Linksys Cisco E1200 V2 DD-WRT Supported on DD-WRT forums (v1 label shot)
- 58:6D:8F OUI on the label in GOATSE's label shot
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
On the DDWRT Forum
On the DDWRT Forum
On the DDWRT Forum
Support started version: ?
Current supported version: ?
On the DDWRT Forum
On the DDWRT Forum
Support started version: ?
Current supported version: ?
Please insert instructions here
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: 22.03.7
Unsupported Functions:
WiFi 2.4GHz
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: 22.03.7
Unsupported Functions:
WiFi 2.4GHz
Please insert instructions here
Flashing Tomato
- Supported by K26RT-N builds of Tomato by Shibby.
- Also supported by Tomato Hyzoom
JTAG-Serial Info
Serial
Serial Pinouts
1 = vcc (3.3v) 2 = tx 3 = rx 4 = n/c 5 = ground
USB Info
Possible Mod to add
Pictures
Categories:
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5357B0
- Broadcom
- Embedded System MIPS 74K
- Embedded System
- Manuf CyberTAN
- DD-WRT Supported
- OpenWrt Was Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation