Linksys E1550
bgn (N300) | |
---|---|
Wireless-N Router with SpeedBoost | |
Support | |
Wikipedia | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor | |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Linksys E1550 |
Serial number prefix |
10C10 |
FCC ID | |
IC ID | |
Type |
wireless router |
CPU1 |
Broadcom BCM5358UB0 |
CPU1 Type |
MIPS 74K |
CPU1 Speed |
500 MHz |
Flash1 Chip |
Winbond 25Q128BVFG |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
EtronTech EM6AB160TSC-5G |
ETH chip1 |
Broadcom BCM5358UB0 |
Switch |
Broadcom BCM5358UB0 |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 1.5 A |
Connector type |
barrel |
Other | |
Default IP address: 192.168.1.1 | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
FCC approval date | 28 January 2011 |
UPC |
745883592395 (UPC DB, On eBay) |
ASIN | B00630RVJO |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM5358UB0 |
Wireless interface OUI |
C0:C1:C0 |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio cor_rev |
28 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys device with specifications, see Linksys.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
- E1550 v1 serials appear to start with 10C10
Supported by K26RT-N builds of Tomato by Shibby.
"3763-11600102R" is silkscreened on the board in the FCC photos.
Links of Interest
- New Linksys Router (E1200; E1500; E2500; E3200) On the DD-WRT Forum
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Please insert instructions here
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: 23.05.5
Unsupported Functions:
WiFi 2.4GHz
Please insert instructions here
Flashing Tomato
Please insert instructions here
Pictures
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5358UB0
- Broadcom
- Embedded System MIPS 74K
- Embedded System
- Manuf CyberTAN
- DD-WRT Supported
- OpenWrt Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation