Linksys E2500 v2
abgn (AN600) | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Advanced Dual-Band N Router | |||||||||||||||||||||
![]() | |||||||||||||||||||||
Support | Support page | ||||||||||||||||||||
Wikipedia | Linksys routers | ||||||||||||||||||||
WikiDevi.wi-cat.ru | Linksys E2500 v2 | ||||||||||||||||||||
3rd Party Firmware | |||||||||||||||||||||
dd-wrt | Status Unknown | ||||||||||||||||||||
OpenWrt | Partial Support | ||||||||||||||||||||
Tomato any flavor | Supported | ||||||||||||||||||||
Gargoyle | Status Unknown | ||||||||||||||||||||
Platform | |||||||||||||||||||||
Brand • Model • Rev | Linksys E2500 v2 | ||||||||||||||||||||
FCC ID | Q87-E2500V2 | ||||||||||||||||||||
IC ID | 3839A-E2500V2 | ||||||||||||||||||||
Type | wireless router | ||||||||||||||||||||
CPU1 ![]() | Broadcom BCM5358UB0 | ||||||||||||||||||||
CPU1 Type | MIPS 74K | ||||||||||||||||||||
CPU1 Speed | 500 MHz | ||||||||||||||||||||
Flash1 Chip | Winbond Model? | ||||||||||||||||||||
Flash1 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||||||||||
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||||||
RAM1 Chip | Samsung Model? | ||||||||||||||||||||
ETH chip1 | Broadcom BCM5358UB0 | ||||||||||||||||||||
Switch | Broadcom BCM5358UB0 | ||||||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||||||||||
Wired Standard | IEEE 802.3i/3u | ||||||||||||||||||||
Expansion IF types | none specified | ||||||||||||||||||||
Power | 12 VDC, 1 A | ||||||||||||||||||||
Connector type | barrel | ||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
Other | |||||||||||||||||||||
Default SSID: CiscoXXXXX (6 addl. devices) | |||||||||||||||||||||
Manuf/OEM/ODM | CyberTAN | ||||||||||||||||||||
3rd Party Firmware Support |
FreshTomato • (List | DLs) , OpenWrt • (List | Dev | DLs) | ||||||||||||||||||||
Retail | |||||||||||||||||||||
Availability | End of Life | ||||||||||||||||||||
FCC approval date | 16 November 2012 | ||||||||||||||||||||
Country of manuf | China | ||||||||||||||||||||
Radio 1 | |||||||||||||||||||||
Chip1 | Broadcom BCM5358UB0 | ||||||||||||||||||||
Wireless interface OUI | 48:F8:B3 | ||||||||||||||||||||
Antenna Connector Type | none specified | ||||||||||||||||||||
MIMO status | 2x2:2 | ||||||||||||||||||||
Wireless Standard | IEEE 802.11b/g/n | ||||||||||||||||||||
802.11n | up to 300 Mbps | ||||||||||||||||||||
802.11g | up to 54 Mbps | ||||||||||||||||||||
802.11b | up to 11 Mbps | ||||||||||||||||||||
WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||||||
Radio cor_rev | 28 | ||||||||||||||||||||
Radio 2 | |||||||||||||||||||||
Chip1 | Broadcom BCM43236 | ||||||||||||||||||||
Wireless interface OUI | 48:F8:B3 | ||||||||||||||||||||
Antenna Connector Type | U.FL | ||||||||||||||||||||
MIMO status | 2x2:2 | ||||||||||||||||||||
Wireless Standard | IEEE 802.11a/n | ||||||||||||||||||||
802.11n | up to 300 Mbps | ||||||||||||||||||||
802.11a | up to 54 Mbps | ||||||||||||||||||||
WiFi Operating Frequency | 5 GHz | ||||||||||||||||||||
Radio cor_rev | 24 | ||||||||||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys devices with specifications, see Linksys.
Overview
"3753-30000501R" and the Cisco logo is silkscreened on the board in the FCC photos.
This device seems to be another BCM5358UB0 (identifiable in FCC photos) + BCM43236x (not identifiable) device.
Flashed with third party firmware, dmesg reports:
- 8MB ST compatible serial flash
- CPU: BCM5357 rev 2 at 300 MHz
- Determined physical RAM memory: 65536k
- ethx: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.9
This data was used to determine Flash and RAM size
The default SSID pattern is CiscoXXXXX, where XXXXX is the last 5 digits of the router's serial number.
Links of Interest
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Support started version: ?
Current supported version: ?
Comment:
K26 build 18946 20120407 no 5 GHz
Please insert instructions here
Flashing OpenWrt
![]() | Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: 24.10.2
Unsupported Functions:
WiFi 2.4GHz, WiFi 5GHz
Please insert instructions here
Flashing Tomato
Please insert instructions here
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5358UB0
- Broadcom
- Embedded System MIPS 74K
- Embedded System
- Manuf CyberTAN
- Tomato Supported
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM43236
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation