Linksys EA7300 v1

From TechInfoDepot
(Redirected from Linksys EA7300)
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1750)
Max-Stream AC1750 MU-MIMO Gigabit Wi-Fi Router
Homepage Product page
Support Support page
Wikipedia Linksys routers
WikiDevi.wi-cat.ru Linksys EA7300 v1
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Linksys EA7300 v1
FCC ID Q87-EA7300
Board ID BWY00C-1.6MM
Type wireless router
Series EA7300
CPU1 checkY MediaTek MT7621A
CPU1 Type MIPS 1004Kc
CPU1 Speed 880 MHz ( 2 cores ) 16-bit
Flash1 Chip Macronix MX30LF1G18AC-TI
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip Nanya NT6CC128M16IP-DI
ETH chip1 MediaTek MT7621A
Switch MediaTek MT7621A
Ethernet Port Count 1-1GbE-WAN
4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: 60:38:E0 (2 E, 2 W)
Ethernet OUI: 60:38:E0 (2 E, 2 W)

Stock bootloader U-Boot
Expansion IF types USB 3.0
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 2.5 A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)

Flags:
Wave2, MU-MIMO

Other

Default SSID: LinksysXXXXX (17 addl. devices)
, LinksysXXXXX 5GHz
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1359 additional devices
of which 155 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 292 additional devices
of which 135 are Linksys devices

Manuf/OEM/ODM SerComm
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
FCC approval date 01 September 2016
(Est.) initial retail price (in USD): $150
Newegg N82E16833124633
ASIN B01JOXW58I , 
multiple uses
Country of manuf China
Radio 1
Chip1 MediaTek MT7615N
Wireless interface OUI 60:38:E0
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11b/g/n
802.11n up to 450 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7615N
Wireless interface OUI 60:38:E0
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 1300 Mbps
802.11n up to 450 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Linksys EA7300 v1MediaTekMediaTekMediaTek
Linksys EA7300 v2MediaTekMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Linksys devices with specifications, see Linksys.

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.),
• 1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.) = AC1750 class

Overview

User guide

"BWY00C-1.6MM" is silkscrened on the board image shown. This would indicate SerComm manufacture.

Wi-Fi Certified : WFA67654 (as of 2016-10-07)

Links of Interest

image @: https://www.linksys.com/resources/img/features/ea7300/linksys-li-EA7300-1.jpg

User Guide https://downloads.linksys.com/downloads/userguide/EA7300_UG_INTL.pdf

Latest Firmware (Ver. 1.0.11.200282 3/30/2020) https://downloads.linksys.com/support/assets/firmware/FW_EA7300_1.0.11.200282_prod.img

Flashing

Flashing OpenWrt

Target: ramips
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: fix
LAN Hardware: MediaTek MT7621A
WLAN Hardware: MediaTek MT7615N
WLAN Comment: MIMO 3x3:3 both channels
Installation method(s):
GUI OEM, see git-commit
Recovery method(s):
See git-commit
git • >> 
ramips: add support for Linksys EA7300 v1
Specifications:

* SoC:      MediaTek MT7621A              (880 MHz 2c/4t)
* RAM:      Nanya NT5CC128M16IP-DIT       (256M DDR3-1600)
* Flash:    Macronix MX30LF1G18AC-TI      (128M NAND)
* Eth:      MediaTek MT7621A              (10/100/1000 Mbps x5)
* Radio:    MT7615N                       (2.4 GHz & 5 GHz)
            4 antennae: 1 internal and 3 non-deatachable
* USB:      3.0 (x1)
* LEDs:
    White   (x1 logo)
    Green   (x6 eth + wps)
    Orange  (x5, hardware-bound)
* Buttons:
    Reset   (x1)
    WPS     (x1)

Everything works! Been running it for a couple weeks now and haven't had
any problems. Please let me know if you run into any.

Installation:

Flash factory image through GUI.

This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.

Reverting to factory firmware:

Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.

Notes

Product Features

  • AC1750 MU-MIMO Dual-Band Gigabit (450+1300 Mbps)
  • 802.11abgn/ac, N450 (2.4 GHz) + AC1300 (5 GHz)
  • Simultaneous Dual-Band, 3x3 Spatial Streams
  • Beamforming Technology, Seamless Roaming
  • Antennas: One (1x) internal antenna (?),
Three (3x) external non-detachable dipole antennas
  • Guest Access: Supports up to 50 guests,
both 2.4/5GHz bands have a unique Network Name (SSID)
  • Ports: One (1x) WAN / Internet Gigabit port
Four (4x) LAN / Ethernet Gigabit ports
One (1x) USB 3.0 port with a current draw of up to 1100mA
Digital Living Network Alliance (DLNA)-compatible
Virtual printing support, Universal Plug and Play (UPnP)
  • Switch/Button: One (1x) rocket-style power switch
One (1x) reset push-button to restore factory default settings
One (1x) Wi-Fi Protected Setup (WPS) push-button
  • Wi-Fi Protected Setup (WPS) 2.0

See also

Linksys

Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Linksys_EA7300_v1&oldid=517461"