Linksys PCM200 v1
From TechInfoDepot
Jump to navigationJump to search
| '''EtherFast 10/100 Integrated CardBus PC Card | |
|
| |
| Support | Support page |
|---|---|
| WikiDevi.wi-cat.ru | Linksys PCM200 v1 |
| Wikipedia | Linksys routers |
| Platform | |
| Brand • Model • Rev | Linksys PCM200 v1 |
| Interface | PCMCIA (32-bit) |
| Connector | PCMCIA (32-bit) |
| Form factor | Type II |
|
| |
|
ID:1737:ab09 | |
|
| |
| Chip1 | ADMtek AN985 (Centaur-C) |
| Ethernet Port Count | 1-100MbE |
| Ethernet connector | 8P8C |
| Wired Standard | IEEE 802.3i/3u |
| Auto-MDIX | unspecified |
| Other | |
| Manuf/OEM/ODM | AboCom FE2500MX |
|
| |
|
Probable Linux driver | |
| Retail | |
| FCC approval date | 31 May 2000 |
| UPC |
745883549450 (UPC DB, On eBay) |
| ASIN |
B00004XRDO |
| Country of manuf | Taiwan |
For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Linksys devices with specifications, see Linksys.
Overview
This card is presumed to be the v1 model. There is no version info on the card.
1737:ab09 appears to be the PCI ID used. It is found in the driver set for the card (in NETPC200.INF).
- Additional PCI IDs in the drivers include...
- 1737:ab08 - "Linksys EtherFast 10/100 CardBus PC Card Ver II(PCMPC200 vII)"
dmesg dump
[18073.446723] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007) [18073.446789] tulip 0000:07:00.0: enabling device (0000 -> 0003) [18073.446835] tulip: tulip_init_one: Enabled WOL support for AN983B [18073.446856] tulip 0000:07:00.0: setting latency timer to 64 [18073.449189] tulip0: MII transceiver #1 config 3100 status 7849 advertising 05e1 [18073.473547] net eth1: ADMtek Comet rev 17 at Port 0x4000, 00:04:5a:a5:85:11, IRQ 19