Linksys WET11 v1

multiple revisions of this device, use caution

b (B11)
Wireless-G Business Ethernet Bridge
Support	Support page
Wikipedia	Linksys routers
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Linksys WET11 v1
FCC ID	PKW-WETAP11
Type	bridge
CPU1	Ubicom IP2022
CPU1 Type	Ubicom 32
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Ubicom IP2022
Ethernet Port Count	1-LAN
802dot11 OUI: none specified
Expansion IF types	PCMCIA (16-bit)
PCMCIA slots	1
Power	? VDC, ? A
Connector type	barrel
Flags: schematics, block diagram
Other
Default SSID: linksys (53 addl. devices)
Manuf/OEM/ODM	BroMax
Retail
FCC approval date	07 February 2002
Country of manuf	Taiwan
Radio 1
Radio1 module	BroMax WE252-IF
Radio1 module IF	PCMCIA (16-bit)
Chip1	Intersil ISL3873
Chip2	Intersil ISL3685
Wireless interface OUI	none specified
Antenna Connector Type	MMCX, RP-SMA
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Linksys WET11 v1 Ubicom Intersil Intersil Linksys WET11 v2 Ubicom Agere

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.

For a list of all currently documented Linksys device with specifications, see Linksys.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"WE252-IF REV: XB" is silkscreened on the wireless module in the FCC photos.

Hacking the WET11 v1 (replacing the wireless module with a Senao SL-2511CD PLUS EXT2)

There are likely multiple revisions of this device.

• BBQ002... S/N
  • FCC ID: PKW-WM11 (BroMax WM302-IF [PRISM 3 (ISL3871IN33)] module)
  • 00:06:25 OUI

Per the FCC manual, the default SSID is linksys.