Linksys WRTU54G-TM

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
Wireless-G Broadband Router with 2 Phone Ports
Linksys WRTU54G-TM.jpg
Support
Wikipedia
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Linksys WRTU54G-TM
Serial number prefix
QMF0
FCC ID
IC ID
Type
wireless router, analog phone gateway
CPU1 checkY
Infineon ADM8668FX
CPU1 Type
MIPS 4Kc
CPU1 Speed
200 MHz
Flash1 Chip
Macronix MX29LV640DBTC-90G
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Mira P3V56S40ETP-G6 x 2
ETH chip1
Infineon ADM8668FX
Switch
Infineon ADM6996M
VOIP Ports
2
Ethernet Port Count
1-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:1E:E5 (11 E, 20 W), 00:21:29 (9 E, 16 W), 00:22:6B (8 E, 11 W)
Ethernet OUI: 00:1E:E5 (11 E, 20 W), 00:21:29 (9 E, 16 W), 00:22:6B (8 E, 11 W)

Stock bootloader
U-Boot 2.1.4
Stock FW OS
Linux 2.4.31
Expansion IF types
none specified
Power
12 VDC, 1.5 A
Connector type
barrel
5.5 mm (OD)
2.1 mm (ID)
10 mm (LEN)
Serial Port (UART)
yes, (115200 8N1)
Flags:
boot log

Additional chips
Ringing SLIC with Integrated DC/DC Converter;Infineon;PEF 4268 T V1.2;Infineon, PEF 4268 T, V1.2, VE816226N17;2;
VINETIC-2AMR Voice Processor;Infineon;PEB 3352 HT V1.2;;
Smart Card Reader;ST Microelectronics;GCSIMPRO 1.00;;

Other

Default SSID: @HomeXXXX (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 816 additional devices
of which 6 are Linksys devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1347 additional devices
of which 59 are Linksys devices

Manuf/OEM/ODM
3rd Party Firmware Support
Retail
Availability End of Life
FCC approval date 07 August 2007
UPC 745883575350
(UPC DB, On eBay)
ASIN B003UBJZ6G Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Ralink RT2561S
Chip2
Ralink RT2527
Wireless interface OUI
00:1E:E5, 00:21:29, 00:22:6B
Antenna Connector Type
U.FL, RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Linksys WRTU54G-TMInfineonRalinkRalink
Linksys WRTU54GV2-TMInfineonRalinkRalink

For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Linksys device with specifications, see Linksys.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

2010-12-16 final firmware version 1.00.25

WRTU54G-TM serial numbers appear to start with QMF0.

"613-180173R" is silkscreened on the board.

This is presumed to be a Tecom P/N.

The default SSID is @HomeXXXX where XXXX is the last two octets of the wireless interface MAC address (upper case letters).

The power adapter included with the device is a PSA18R-120P (12V, 1.5A).

Links of Interest

WRTU54G-TM and OpenWrt

Info dump

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: adm8668
OpenWrt Subtarget: generic
OpenWrt Package architecture: mipsel_mips32
Support started version: 12.09
Current supported version: EOL
Last Supported Version: 12.09

Please insert instructions here

JTAG-Serial Info

Serial

Serial Pinouts

JP2

1 [VCC]
2 [TxD]
3 [RxD]
4 [GND]


Boot log

07e?4

(v1.00.02) U-Boot 2.1.4 (Jan 28 2008 - 14:56:42)

DRAM:  64 MB
Flash:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   adm8668_net
Hit any key to stop autoboot:  0
## Booting image at b0040000 ...
Check vendor string...    Image Name:   ADM8668 Linux Kernel(2.4.31)
   Created:      2010-05-26   0:52:58 UTC
   Image Type:   MIPS Linux Kernel Image (gzip compressed)
   Data Size:    5664704 Bytes =  5.4 MB
   Load Address: 00002000
   Entry Point:  80222040
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...


LINUX/8668 started...
CPU revision is: 0001800b
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.31-ADM8668 (root@localhost.localdomain) (gcc version 3.3.6) #1.00.25 17:51:34 PDT 05/25/2010
Can't analyze prologue code at 8001f824
adm8668_setup() starts.
System has PCI BIOS
Determined physical RAM map:
 memory: 03d88000 @ 00278000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: rootfstype=squashfs root=/dev/mtdblock1 console=/dev/ttyS0
CPU clock: 200 MHz
Using 100.000 MHz high precision timer.
Syam before calibrate_delay
Calibrating delay loop...
199.47 BogoMIPS
Syam after calibrate_delay
MIPS CPU counter frequency is fixed at 100000000 Hz
Memory: 62296k/63008k available (2160k kernel code, 712k reserved, 124k data, 104k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  available.
POSIX conformance testing by UNIFIX
The GAN WDT version is 0.0.1 The Built TIME is 17:52:43
Autoconfig PCI channel 0x8025c9f8
Scanning bus 00, I/O 0x12600000:0x12800000, Mem 0x16000000:0x1e000000
00:00.0 Class 0600: 1317:8688
        Mem unavailable -- skipping
        I/O at 0x12600000 [size=0x100000]
00:01.0 Class 0280: 1814:0301
        Mem at 0x16000000 [size=0x8000]
ADM8668 PCI FIXUP
PCI_BIOS_FIXUP
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
pty: 256 Unix98 ptys configured
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
NOR flash vendor: 0xc2 device: 0x22cb
Backup segment is working!
ADM8668 proc initialization okay!
adm1: Infineon-ADMtek onchip network rev 0 at 0x11600000, 00:1E:E5:B7:0E:32, IRQ 8.
adm0: Infineon-ADMtek onchip network rev 0 at 0x11a00000, 00:1E:E5:B7:0E:31, IRQ 7.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
*RT61*<7>===> RT61_init_one
*RT61*<7>Driver version-1.1.0.0
*RT61*<7>ra0: at 0x16000000, VA 0xb6000000, IRQ 14.
*RT61*<7><=== RT61_init_one
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub

 usb_hcd_arc_probe :  ehci_hcd
 USB Base Address: b1200100<6>usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 1 port detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 600 bytes per conntrack
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
ADM8668 NOR flash device: 800000 at 10000000
ADM8668 NOR flash device: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 2 MTD partitions on "ADM8668 NOR flash device":
0x00030000-0x001b0000 : "Kernel Image"
0x00200000-0x00600000 : "LZMA Image"
ADM8668 NOR flash device initialized
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 104k freed
init started:  BusyBox v1.00 (2010.05.26-00:45+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
Starting RAWACCESS device driver...
Using /lib/modules/ifx_raw_acs
(raw_acs)Init raw_acs successfully!
Vendor: 0xc2 Device: 0x22cb Flash size: 800000
hub.c: new USB device ehci_hcd-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x8e6/0x3480) is not claimed by any active driver.
rawdev opened!
(raw_acs)flash_read (b0020000)
Read RAW_INFO...
Read 19685 bytes from flash (fd: 3)
18229 bytes...Uncompressed to...124221 bytes
Write 13270 bytes to /nv/rc.conf
Write 352 bytes to /nv/udhcpd.leases
Write 3600 bytes to /nv/umastatus1.log
Write 203 bytes to /nv/prd_config.txt
Write 414 bytes to /nv/rc.static
Write 960 bytes to /nv/11e_info
Write 21018 bytes to /nv/LICENSE
Write 14582 bytes to /nv/rc.filter
Write 1297 bytes to /nv/RT61AP.dat
Write 1469 bytes to /nv/rc.wlanmac
Write 4208 bytes to /nv/ccmapper.conf
Write 5120 bytes to /nv/kineto_ps_01
Write 28864 bytes to /nv/nas_1.conf
Write 28864 bytes to /nv/nas_2.conf
Read data completely!
rawdev opened!
Set raw access addr: 201f0000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
(raw_acs)Raw Access Addr: 201f0000

rawdev opened!
(raw_acs)flash_read (b05f0000)
Read RAW_INFO...
Read 6003 bytes from flash (fd: 3)
Data Not Compressed!
Write 4547 bytes to /tmp/crt.pem
Read data completely!
rawdev opened!
Set raw access addr: 1fc20000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
(raw_acs)Raw Access Addr: 1fc20000

The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
Starting GAN-VINETIC Board driver...
Using ./BSP_GAN_driver
Warning: loading BSP_GAN_driver will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Vinetic Board Driver(Included SPI driver) Version : 1.0.0
Starting VINETIC device driver...
Using ./drv_vinetic
Warning: loading drv_vinetic will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
VINETIC device driver, version 1.1.17.3
<6>(c) Copyright 2006, Infineon Technologies AG
Using /lib/modules/swmod.o
Loading ADM6996 driver...
Kernel module version: v1.0 Driver version: v2.0beta3 Date code: 2008-11-20
Setting default ADM6996 registers...
ADM6996 proc initialization okay!
Set queue 1 to priority 2
Set queue 2 to priority 4
Set queue 3 to priority 8
Version: CCMAPPER_LIGHT_V1.00
<7>WARN:  No ring configuration in BBD => default ring config is programmed
<7>WARN:  No dc threshold configuration in BBD => default threshold configuration is programmed
Sherlock Debug nEdspVers != 0x0200
Using /usr/nas/klinux.o
Warning: loading klinux will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/sio_ring.o
Warning: loading sio_ring will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lchan.o
Warning: loading io_lchan will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lphone.o
Warning: loading io_lphone will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lapp.o
Warning: loading io_lapp will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/kbutton.o
Loading ADM8668 kbutton driver: Version 1.02
Using /lib/modules/ip_conntrack_proto_gre.o
TMO Pairing Version : 1.0.3
Using /lib/modules/ip_conntrack_pptp.o
ip_conntrack_pptp version 1.9 loaded
Using /lib/modules/ip_nat_proto_gre.o
Using /lib/modules/ip_nat_pptp.o
ip_nat_pptp version 1.5 loaded
Tue Apr 17 17:29:00 UTC 2012
Initialize Ralink Wlan ...
Setting Pairing LED to : ON-Green
*RT61*<7>===> NICLoadFirmware
*RT61*<7>NICLoadFirmware: CRC ok, ver=1.2
*RT61*<7><=== NICLoadFirmware (src=/etc/Wireless/RT61AP/RT2561S.bin, status=0)
*RT61*<7>--> RTMPAllocAdapterBlock
*RT61*<7><-- RTMPAllocAdapterBlock
*RT61*<7>--> RTMPAllocDMAMemory
*RT61*<7>TxRing[0]: total 96 entry allocated
*RT61*<7>TxRing[1]: total 96 entry allocated
*RT61*<7>TxRing[2]: total 96 entry allocated
*RT61*<7>TxRing[3]: total 96 entry allocated
*RT61*<7>TxRing[4]: total 96 entry allocated
*RT61*<7>MGMT Ring: total 32 entry allocated
*RT61*<7>Rx Ring: total 96 entry allocated
*RT61*<7><-- RTMPAllocDMAMemory
*RT61*<7><--> NICInitTxRxRingAndBacklogQueue
*RT61*<7>--> MLME Initialize
*RT61*<7><-- MLME Initialize
*RT61*<7>--> PortCfgInit
*RT61*<7><-- PortCfgInit
*RT61*<7>--> NICInitializeAdapter
*RT61*<7>--> NICInitializeAsic
*RT61*<7>BBP version = 22
*RT61*<7><-- NICInitializeAsic
*RT61*<7><-- NICInitializeAdapter
*RT61*<7>CountryRegion=5
*RT61*<7>CountryRegionABand=7
*RT61*<7>CountryCode=
*RT61*<7>SSID[0]=FlowersEstateFreeInternetService
*RT61*<7>PhyMode=0
*RT61*<7>I/F(ra0) TxRate=(6c,60,48,30,16,0b,04,02,00,00,00,00)
*RT61*<7>Channel=6
*RT61*<7>BasicRate=15
*RT61*<7>BeaconPeriod=100
*RT61*<7>DtimPeriod=1
*RT61*<7>TxPower=100
*RT61*<7>BGProtection=2
*RT61*<7>OLBCDetection=0
*RT61*<7>TxAntenna=1
*RT61*<7>RxAntenna=
*RT61*<7>TxPreamble=0
*RT61*<7>RTSThreshold=2347
*RT61*<7>FragThreshold=2346
*RT61*<7>TxBurst=0
*RT61*<7>PktAggregate=1
*RT61*<7>TurboRate=0
*RT61*<7>I/F(ra0) WmmCapable=1
*RT61*<7>I/F(ra0) DLSCapable=0
*RT61*<7>APAifsn[0]=3
*RT61*<7>APAifsn[1]=7
*RT61*<7>APAifsn[2]=1
*RT61*<7>APAifsn[3]=1
*RT61*<7>APCwmin[0]=4
*RT61*<7>APCwmin[1]=4
*RT61*<7>APCwmin[2]=3
*RT61*<7>APCwmin[3]=2
*RT61*<7>APCwmax[0]=6
*RT61*<7>APCwmax[1]=10
*RT61*<7>APCwmax[2]=4
*RT61*<7>APCwmax[3]=3
*RT61*<7>APTxop[0]=0
*RT61*<7>APTxop[1]=0
*RT61*<7>APTxop[2]=94
*RT61*<7>APTxop[3]=47
*RT61*<7>APACM[0]=0
*RT61*<7>APACM[1]=0
*RT61*<7>APACM[2]=0
*RT61*<7>APACM[3]=0
*RT61*<7>BSSAifsn[0]=3
*RT61*<7>BSSAifsn[1]=7
*RT61*<7>BSSAifsn[2]=2
*RT61*<7>BSSAifsn[3]=2
*RT61*<7>BSSCwmin[0]=4
*RT61*<7>BSSCwmin[1]=4
*RT61*<7>BSSCwmin[2]=3
*RT61*<7>BSSCwmin[3]=2
*RT61*<7>BSSCwmax[0]=10
*RT61*<7>BSSCwmax[1]=10
*RT61*<7>BSSCwmax[2]=4
*RT61*<7>BSSCwmax[3]=3
*RT61*<7>BSSTxop[0]=0
*RT61*<7>BSSTxop[1]=0
*RT61*<7>BSSTxop[2]=94
*RT61*<7>BSSTxop[3]=47
*RT61*<7>BSSACM[0]=0
*RT61*<7>BSSACM[1]=0
*RT61*<7>BSSACM[2]=0
*RT61*<7>BSSACM[3]=0
*RT61*<7>AckPolicy[0]=0
*RT61*<7>AckPolicy[1]=0
*RT61*<7>AckPolicy[2]=0
*RT61*<7>AckPolicy[3]=0
*RT61*<7>APSDCapable=1
*RT61*<7>I/F(ra0) NoForwarding=0
*RT61*<7>NoForwardingBTNBSSID=0
*RT61*<7>I/F(ra0) HideSSID=0
*RT61*<7>ShortSlot=1
*RT61*<7>AutoChannelAtBootup=0
*RT61*<7>MaxTxPowerLevel=16
*RT61*<7>IEEE8021X=0
*RT61*<7>IEEE80211H=0
*RT61*<7>CSPeriod=10
*RT61*<7>PreAuth=0
*RT61*<7>RTMPMakeRSNIE IF(ra0): RSNIE_Len[0]=6, RSNIE_Len[1]=0
*RT61*<7>I/F(ra0) AuthMode=4
*RT61*<7>RTMPMakeRSNIE IF(ra0): RSNIE_Len[0]=22, RSNIE_Len[1]=0
*RT61*<7>I/F(ra0) EncrypType=4
*RT61*<7>ReKeyMethod=0
*RT61*<7>ReKeyInterval=3600
*RT61*<7>PMKCachePeriod=60000
*RT61*<7>I/F(ra0) WPAPSK_KEY=white202
*RT61*<7>strong RSSI=0, CCA=0, fixed R17 at 0x41, R62=4
*RT61*<7>I/F(ra0) WPAPSK Key =>
9f:6d:17:ac:71:84:b0:4f:c5:48:b2:5b:3d:92:68:81:
f7:cc:5a:9d:e6:f7:c4:f2:fa:fd:1e:0d:65:39:a1:32:

*RT61*<7>I/F(ra0) DefaultKeyID(0~3)=1
*RT61*<7>I/F(ra0) Key1Str=f933e98d7a and type=Hex
*RT61*<7>I/F(ra0) Key2Str=9456cc6905 and type=Hex
*RT61*<7>I/F(ra0) Key3Str=8ecdaf99de and type=Hex
*RT61*<7>I/F(ra0) Key4Str=f52d7e4f7a and type=Hex
*RT61*<7>HSCounter=0
*RT61*<7>AccessPolicy0=0
*RT61*<7>AccessControlList0=Get 0 Mac Address
*RT61*<7>--> NICReadEEPROMParameters
*RT61*<7>MBSSID[0] MAC=00:1e:e5:b7:0e:30
*RT61*<7>E2PROM: Version = 1, FAE release #0
*RT61*<7>E2PROM: G Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0
*RT61*<7>E2PROM: A Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0
*RT61*<7>E2PROM: RF freq offset=0x11, RF programming seq=0
*RT61*<7>TxPowerDelta Config (Delta=2, Sign=0, Enable=1)
*RT61*<7><-- NICReadEEPROMParameters
*RT61*<7>country code=5/7, RFIC=1, PHY mode=0, support 14 channels
*RT61*<7>channel #1
*RT61*<7>channel #2
*RT61*<7>channel #3
*RT61*<7>channel #4
*RT61*<7>channel #5
*RT61*<7>channel #6
*RT61*<7>channel #7
*RT61*<7>channel #8
*RT61*<7>channel #9
*RT61*<7>channel #10
*RT61*<7>channel #11
*RT61*<7>channel #12
*RT61*<7>channel #13
*RT61*<7>channel #14
*RT61*<7>IF(ra0) RTMPSetPhyMode(=0)
*RT61*<7>I/F(ra0) TxRate=(6c,60,48,30,16,0b,04,02,00,00,00,00)
*RT61*<7>--> NICInitAsicFromEEPROM
*RT61*<7>RFIC=3, LED mode=26
*RT61*<7><-- NICInitAsicFromEEPROM
*RT61*<7>---> ApInitialize
*RT61*<7><--- ApInitialize
*RT61*<7>---> ApStartUp
*RT61*<7>IF(ra0) CapabilityInfo=411, WepStatus=4
*RT61*<7>IF(ra0)-AP AuthMode=4, IEEE802.1x is 0, Pairwise Key Table in-used
*RT61*<7>AsicRemoveSharedKeyEntry: #0
*RT61*<7>AsicRemoveSharedKeyEntry: #1
*RT61*<7>AsicRemoveSharedKeyEntry: #2
*RT61*<7>AsicRemoveSharedKeyEntry: #3
*RT61*<7>AsicSetEdcaParm
*RT61*<7>AP [Cnt#0]: AIFSN CWmin CWmax TXOP(us)  ACM
*RT61*<7>    AC_BE     3     4     6        0     0
*RT61*<7>    AC_BK     7     4     10        0     0
*RT61*<7>    AC_VI     1     3     4     3008     0
*RT61*<7>    AC_VO     1     2     3     1504     0
*RT61*<7>STA        : AIFSN CWmin CWmax TXOP(us)  ACM
*RT61*<7>    AC_BE     3     4   10       0     0
*RT61*<7>    AC_BK     7     4   10       0     0
*RT61*<7>    AC_VI     2     3     4    3008     0
*RT61*<7>    AC_VO     2     2     3     1504     0
*RT61*<7>AsicSwitchChannel(RF=3, Pwr=14) to #6, R1=0x95002ccc, R2=0x9500478e, R3=0x95069c55, R4=0x950d1a1f
*RT61*<7>UpdateBasicRateBitmap::(BasicRateBitMap=f)(82,84,8b,96,0c,12,18,24,30,48,60,6c)
*RT61*<7>IF(ra0) MlmeUpdateTxRates (MaxDesire=54 Mbps, MaxSupport=54 Mbps, MaxTxRate=54 Mbps, Rate Switching =1)
*RT61*<7> MlmeUpdateTxRates (RtsRate=11 Mbps, MlmeRate=1 Mbps, BasicRateBitmap=0x015f)
*RT61*<7>MakeBssBeacon(ra0)(FrameLen=103,TimIELocateInBeacon=103,CapInfoLocateInBeacon=34)
*RT61*<7>SW interrupt MCU (cmd=0x60, token=0xff, arg1,arg0=0x00,0x00)
*RT61*<7>--->AsicEnableBssSync(INFRA mode)
*RT61*<7>--->Disable TSF synchronization
*RT61*<7>SW interrupt MCU (cmd=0x50, token=0xff, arg1,arg0=0x3f,0x3a)
*RT61*<7>MlmePeriodicExec: no traffic, Reset AsicBbpTuning
*RT61*<7>Reset AsicBbpTuning, BBP_R62=4, OneSecFalseCCACnt=263
*RT61*<7>SW interrupt MCU (cmd=0x50, token=0xff, arg1,arg0=0x3f,0x7a)
*RT61*<7>LOG#0 00:1e:e5:b7:0e:30 restart access point
*RT61*<7><--- ApStartUp (sec_csr4=0x1)
*RT61*<7>==> Set_Debug_Proc *******************
Ralink Wlan is ready.
device adm0 entered promiscuous mode
device ra0 entered promiscuous mode
adm0: Promiscuous mode enabled.
adm0: Promiscuous mode enabled.
adm0: Promiscuous mode enabled.
br0: port 2(ra0) entering learning state
br0: port 1(adm0) entering learning state
Killall luma applications...
Run luma applicaitons...
LUMA Agent starting...
LUMA LogP starting...
Starting DHCP Client ....
udhcpc (v0.9.9-pre) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background.
Setting Hostname: .
br0: port 2(ra0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(adm0) entering forwarding state
br0: topology change detected, propagating
[: reconfig: unknown operand
[: rerun: unknown operand
[: rerun: unknown operand
Failure parsing line 8 of /etc/udhcpd.conf
udhcpd (v0.9.9-pre) started
Unable to open /var/lib/misc/udhcpd.leases for reading
rawdev opened!
(WRITE) addr: 0200, value: b100
(WRITE) addr: 0220, value: b100
(WRITE) addr: 0240, value: b100
(WRITE) addr: 0260, value: b100
NV Daemon Version : 1.1.0
Daemon Successfully forked (pid: 431)
rawdev opened!
/nv/rc.conf: 13263 bytes
/nv/nas_2.conf: 28864 bytes
/nv/nas_1.conf: 28864 bytes
/nv/kineto_ps_01: 5120 bytes
/nv/ccmapper.conf: 4208 bytes
/nv/rc.wlanmac: 1469 bytes
/nv/RT61AP.dat: 1288 bytes
/nv/rc.filter: 14582 bytes
/nv/LICENSE: 21018 bytes
/nv/11e_info: 960 bytes
/nv/rc.static: 414 bytes
/nv/prd_config.txt: 203 bytes
/nv/umastatus1.log: 3600 bytes
Files: 13
(raw_acs)ioctl: RAWDRV_IOCRSRAWACS
(raw_acs)Raw Access Addr: 1fc20000
Got 13263 bytes from /nv/rc.conf
Got 28864 bytes from /nv/nas_2.conf
Got 28864 bytes from /nv/nas_1.conf
Got 5120 bytes from /nv/kineto_ps_01
Got 4208 bytes from /nv/ccmapper.conf
Got 1469 bytes from /nv/rc.wlanmac
Got 1288 bytes from /nv/RT61AP.dat
Got 14582 bytes from /nv/rc.filter
Got 21018 bytes from /nv/LICENSE
Got 960 bytes from /nv/11e_info
Got 414 bytes from /nv/rc.static
Got 203 bytes from /nv/prd_config.txt
Got 3600 bytes from /nv/umastatus1.log
123853 bytes...Compressed to...18212 bytes
Copy 1456 bytes to buffer
(raw_acs)Write 19668
Write 19668 bytes to rawdev!
Store /nv/* to flash completely!

Please press Enter to activate this console.


Pictures

User Images