Loopcomm LP-8616C

multiple revisions of this device, use caution

bgn (N150)
Barricade n/g/b 2.4GHz 150Mbps Wireless Cable/DSL Broadband Router
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Loopcomm LP-8616C
FCC ID	VYTLP-8616C
Type	wireless router
CPU1	Realtek RTL8196C
CPU1 Type	Lexra RLX4181
CPU1 Speed	390 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Realtek RTL8196C
Switch	Realtek RTL8196C
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Flags: schematics
Other
Default IP address: 192.168.1.254 the IP 192.168.1.254 is used by 157 additional devices of which 5 are Loopcomm devices
Retail
FCC approval date	07 December 2010
Country of manuf	Taiwan
Radio 1
Chip1	Realtek Model?
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Loopcomm LP-8616 Realtek Realtek Loopcomm LP-8616C Realtek Realtek

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Loopcomm device with specifications, see Loopcomm.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

Default credentials are defined from the FCC submitted manual.

Probable 00:1A:EF OUI (it's on the FCC label)