Loopcomm LP-8696C

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
wireless router
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Loopcomm LP-8696C
FCC ID VYTLP-8696C
Type wireless router
CPU1 checkY Realtek RTL8196C
CPU1 Type Lexra RLX4181
CPU1 Speed 390 MHz
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Realtek RTL8196C
Switch Realtek RTL8196C
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel

Flags:
schematics

Other

Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 157 additional devices
of which 5 are Loopcomm devices

Retail
FCC approval date 07 December 2010
Radio 1
Chip1 Realtek RTL8192CE
Wireless interface OUI none specified
Antenna Connector Type RP-SMA
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Loopcomm devices with specifications, see Loopcomm.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"LPC0014 REV:2.1" is silkscreened on the board in the FCC photos.

Default crendentials are defined from the FCC submitted manual.

Probable 00:1A:EF (Loopcomm) OUI (on FCC MAC label)

Probably: source

  • RTK 8196C + 8192CE
  • Winbond W25Q16BV - 16M-bit/2MB Flash
  • zentel A3V28S40ETP-G6 - 16MB Ram