Loopcomm LP-9186
From TechInfoDepot
Jump to navigationJump to search
bg (G54) | |
---|---|
wireless router | |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Status Unknown |
Tomato any flavor | Incompatible |
Platform | |
Brand • Model • Rev | Loopcomm LP-9186 |
FCC ID | VYTLP-9186-001 |
Type | wireless router |
CPU1 ![]() | Realtek RTL8186 |
CPU1 Type | Lexra LX5280 |
CPU1 Speed | 180 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | ? MiB |
RAM1 Size | ? MiB |
RAM1 Chip | Brand? Model? |
ETH chip1 | Realtek RTL8186 |
Switch | Realtek Model? |
Ethernet Port Count |
1-WAN 4-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Expansion IF types | none specified |
Power | 12 VAC ~ ? Hz, 1.5 A |
| |
| |
Other | |
Default IP address: 192.168.1.254 | |
Manuf/OEM/ODM | Loopcomm |
Retail | |
FCC approval date | 20 February 2008 |
Country of manuf | Taiwan |
Radio 1 | |
Chip1 | Realtek RTL8186 |
Chip2 | Realtek Model? |
Wireless interface OUI | none specified |
Antenna Connector Type | RP-SMA |
Wireless Standard | IEEE 802.11b/g |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Loopcomm devices with specifications, see Loopcomm.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
Probable used PSU(s)
The power supply shown in the FCC photos is a Rong-Horng Electronic RH48-1201500AU.
Rong-Horng Electronic RH48-1201500AU (more) | |||||
---|---|---|---|---|---|
Input: 120 VAC ~ 60 Hz, ? A | |||||
Input connector: NEMA 1-15P | |||||
Output: 12 VAC, 1.5 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |