Luxul XAP-1610
abgn+ac (AC3100) | |
---|---|
Apex Wave 2 AC3100 Dual-Band Wireless AP | |
Homepage | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Status Unknown |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Luxul XAP-1610 |
FCC ID | |
IC ID | |
Type |
enterprise access point |
CPU1 |
Broadcom BCM4709C0 |
CPU1 Type |
ARM Cortex A9 |
CPU1 Speed |
1.4 GHz ( 2 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
? MiB |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip |
Winbond W632GG6MB12J |
ETH chip1 |
Broadcom BCM4709C0 |
Switch |
Broadcom BCM4709C0 |
Ethernet Port Count |
2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Expansion IF types |
none specified |
PoE |
802.3at, standard |
Power |
48-56 VDC, 0.54 A |
Flags: Wave2, MU-MIMO, acqam | |
Additional chips | |
Other | |
Default IP address: 192.168.0.10 | |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 06 June 2018 |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM4366E |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
4x4:4 |
Wireless Standard |
IEEE 802.11b/g/n |
N-QAM |
up to 1000 Mbps |
802.11n |
up to 600 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Broadcom BCM4366E |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
4x4:4 |
Wireless Standard |
IEEE 802.11a/n/ac |
AC-QAM |
up to 2167 Mbps |
802.11ac |
up to 1733 Mbps |
802.11n |
up to 600 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
Model XWS-2610 is also mentioned in the FCC documents.
A C2PC request on 11/30/2018 mentions, "Changing the manufacture of IC Chip to TSMC (Part number: BCM4366EKMMLW1G) from UMC (Part number: BCM4366EKMMLWG)."
"8WAPAC37.1A1G" is silkscreened on the board in the FCC internal photos from the C2PC request on 11/30/2018. These photos also show the BCM4366EKMMLW1G radios with a TE1808 date code.
Links of Interest
News
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Target: bcm53xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9
Support started version: 19.07.3
Current supported version: 23.05.5
Please insert instructions here
- Luxul
- Embedded system/enterprise access point
- Embedded System Broadcom
- Embedded System BCM4709C0
- Broadcom
- Embedded System ARM
- Embedded System Cortex A9
- OpenWrt Supported
- Embedded System BCM4366E
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation