Makerbase MKS Pi

From TechInfoDepot
Jump to navigationJump to search
3D Printer Control Board
Makerbase MKS Pi.jpeg
Homepage Product page
WikiDevi.wi-cat.ru Makerbase MKS Pi
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Makerbase MKS Pi V1.1
Type single-board computer
CPU1 checkY Rockchip RK3328
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.5 GHz ( 4 cores ) 64-bit
Flash1 Chip Brand? Model?
Flash1 Size 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br />
RAM1 Size 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR3 SDRAM)
RAM1 Chip Winbond W634GU6QB-11 x 2
ETH chip1 Rockchip RK3328
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u
Stock bootloader U-Boot 2021.07 armbian
Stock FW OS Linux 5.16.20 Armbian 22.05.0-trunk Buster
Expansion IF types USB 3.0, USB 2.0, HDMI 2.0, Micro SD Card slot
USB ports 3
SD/MMC Slots 1
HDMI 1
USB Hub Compatible Untested
Power 12-24 VDC, 1.25 A
Connector type Molex (2-pin)
Serial Port (UART) yes, USB Female (Type-C), console, (1500000 8N1)

Flags:
HDMI 2.0, Micro SD Card slot, SPI, I2C, UART

Additional chips
USB to Serial Interface;WCH;CH340C;;1;
Power Management IC w/RTC;Rockchip;RK805-1;;1;
3A, 1.5MHz, 28V Step-Down Converter;Monolithic Power;MP1584;;1;,

Other

Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 236 additional devices
of which 0 are Makerbase devices
Default login user: mks
Default login password: makerbase

3rd Party Firmware Support Armbian
Retail
(Est.) release date June 2022
(Est.) initial retail price (in USD): $40
ASIN B0C8B9BZ3P Flag of the United States.svg

For a list of all currently documented Rockchip SoC's with specifications, see Rockchip.

Overview

"MKS Pi V1.1" is silkscreened on top of board. Makerbase logo and "Makerbase" are silkscreened on bottom of board.

Specifications

Quad-Core ARM (Cortex-A53) Processor
  • GPU: Mali-450 MP2 (supporting 4K @60fps)
Video decoding via VP9 or 10-bit H265/H264
  • Storage: TF card (128GB)/MMC card slot,
eMMC module connector
  • Memory: 1GB (DDR3) SDRAM
  • Network: 1 Fast Ethernet Port
  • USB: 2x USB 2.0 Host, 1x USB 3.0 Host ports
  • Power: 12-24V via 2-pin Molex