Marvell Armada XP Evaluation Board DB-78460-BP
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Marvell Armada XP Evaluation Board DB-78460-BP |
| Type | single-board computer |
| CPU1 | Marvell MV78460 |
| CPU1 Type | ARMv7 PJ4 Core |
| CPU1 Speed | 1.6 GHz ( 4 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (NAND) |
| Flash2 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size | 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Brand? Model? |
| Ethernet Port Count | 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | PCIe, USB 2.0, SATA |
| Mini PCIe slots | 6 |
| USB ports | 3 |
| SATA Ports | 2 |
| USB Hub Compatible | Untested |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Marvell devices with specifications, see Marvell.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3-d16
Support started version: 17.01.0
Current supported version: 24.10.4
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3-d16
Support started version: 17.01.0
Current supported version: 24.10.4
WLAN Comment: WLAN dependent on PCIe card(s) installed
Please insert instructions here