Meraki MR62

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Enterprise-Class, 802.11n Access Point
Cisco Meraki MR62.jpg
WikiDevi.wi-cat.ru Meraki MR62
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Meraki MR62
FCC ID UDX-60018010
IC ID 6961A-60018010
Board ID 7016A0445001
Type managed access point
CPU1 checkY Atheros AR7242
CPU1 Type MIPS 24Kc
CPU1 Speed 400 MHz 32-bit
Flash1 Chip Macronix MX25L12845EMI-10G
Flash1 Size 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Nanya NT5DS32M16DS-5T
ETH chip1 Atheros AR7242
ETH chip2 Atheros AR8021
Ethernet Port Count 1-100MbE-WAN
1-1GbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:18:0A (9 E, 7 W)
Ethernet OUI: 00:18:0A (9 E, 7 W)

Expansion IF types none specified
PoE 802.3af, standard
Power ? VDC, ? A
Connector type Ethernet (PoE)
Other

Default IP address: 10.128.128.128
the IP 10.128.128.128 is used by 2 additional devices
of which 1 are Meraki devices
Default login user: admin
Default login password: unit's serial number
admin:units serial number credentials used by 3 additional devices
of which 1 are Meraki devices

Manuf/OEM/ODM Senao
Retail
FCC approval date 26 October 2011
UPC 810979011194
(UPC DB, On eBay)
ASIN B007SOKSTO Flag of the United States.svg
Country of manuf Taiwan
Radio 1
Chip1 Atheros AR9283
Wireless interface OUI 00:18:0A
Antenna Connector Type U.FL, N-Female
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Meraki devices with specifications, see Meraki.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"7016A0445001 Ver:1.00", or something like that, is silkscreened on the board in the FCC photos.

Default settings in this entry are per the FCC manual.

See also: Cisco Meraki MR12 and Senao