Mercusys Halo H50G v1
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC1900) | |
|---|---|
| AC1900 Whole Home Mesh Wi-Fi System | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Mercusys Halo H50G v1 |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | wireless system |
| CPU1 | MediaTek MT7621 |
| CPU1 Speed | 880 MHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Brand? Model? |
| Ethernet Port Count |
1-1GbE-WAN 2-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types | none specified |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | Brand? Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 4x4:4 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 600 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Brand? Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 1300 Mbps |
| 802.11n | up to 450 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Mercusys devices with specifications, see Mercusys.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: ramips
OpenWrt Subtarget: MT7621
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: MT7621
Support started version: unknown
Current supported version: snapshot
LAN Comment: three Gigabit Ethernet ports both LAN and WAN connections via auto-sensing
Recovery Comment:
it has a recovery flash page.
Recovery Comment:
it has a recovery flash page.
Please insert instructions here