Merkury MI-WW218

bgn (N)
Merkury Innovations Smart Plug
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Merkury MI-WW218
FCC ID	2AJ3WEBECZW03
Type	smart plug, IoT
CPU1	Brand? Model?
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
802dot11 OUI: 68:57:2D
Expansion IF types	none specified
Flags: Bluetooth
Retail
ASIN	B0BRBNS6LN
Radio 1
Chip1	Brand? Model?
Wireless interface OUI	68:57:2D
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g/n
WiFi Operating Frequency	2.4 GHz

Overview

How to Pair the Merkury Smart Plug

https://support.merkurysmart.com/hc/en-us/articles/15424229779099-How-to-Pair-the-Merkury-Smart-Plug

Prior to beginning the pairing process, ensure you have downloaded the Merkury Smart App and successfully created an account. If so, you are ready to start the pairing process!

What’s needed

Know your Wi-Fi network and password

Make sure your mobile device is running iOS® 14 or higher or Android™ 10 or higher

Make sure you’re connecting to a 2.4GHz Wi-Fi network (Merkury Smart app cannot connect to 5GHz networks)

Make sure that the Bluetooth is enabled on your mobile device.

Step 1 On the Home screen select the Devices button from bottom right to add your new device

Step 2 From the Devices screen, select the (+) icon in the top right corner

Step 3 Select the device to pair, then select confirm.

Get Ready to Pair screen and ensure you select Allow/Ok for pop-up’s related to Location and Bluetooth as these are mandatory to continue

Step 4 Power on your device, select Continue to pair if the indicator light is flashing on your

device. If the indicator light is not flashing press the power button on the side of the

device and hold in until indicator light starts flashing.

Step 5 Select continue on the Confirm Pairing Mode screen.

Step 6 Select your Wi-Fi network, enter the password and select continue

Step 7 iOS users will see a pop-up to join the network, select Join

Android users may or may not see a pop-up to select the network that begins with

Merkury-xxxx. When you see the pop-up, tap on the Merkury device’s network

The screen will then be followed by three screens (Shown below) as the device is connecting to the network

Step 8 Select Continue on the Device paired screen.

Step 9 Name your device or select a preset name to be displayed on the Home Screen, then

select next.

Step 10 Select Continue on the Congratulations! Screen.

Step 11 Select Okay on the Updating your device screen to return to the home screen.

You’re all set! Your Merkury Smart Plug- In is now paired!