Meru Networks AP1020i
From TechInfoDepot
Jump to navigationJump to search
| abgn (AN600) | |||||
|---|---|---|---|---|---|
| Dual Radio Access Point AP1000 | |||||
|
| |||||
| WikiDevi.wi-cat.ru | Meru Networks AP1020i | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Status Unknown | ||||
| Tomato any flavor | Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev | Meru Networks AP1020i | ||||
| FCC ID | RE7-AP1020 | ||||
| IC ID | 6749A-AP1020 | ||||
| Type | access point | ||||
| CPU1 | Broadcom BCM4748A1 | ||||
| CPU1 Type | MIPS 74K | ||||
| CPU1 Speed | 533 MHz | ||||
| Flash1 Chip | Spansion S29GL128P90TFIR2 | ||||
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||
| RAM1 Chip | SK hynix H5PS5162FFR-Y5C x 2 | ||||
| ETH chip1 | Broadcom BCM4748A1 | ||||
| ETH chip2 | Broadcom BCM5481A2 | ||||
| Ethernet Port Count | 1-1GbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types | Mini PCIe, USB 2.0 | ||||
| Mini PCIe slots | 1 | ||||
| USB ports | 1 | ||||
| USB Hub Compatible | Untested | ||||
| PoE | 802.3af, standard | ||||
| Power | 48 VDC, 0.3 A | ||||
| Connector type | Ethernet (PoE) | ||||
| Serial Port (UART) | yes | ||||
|
| |||||
|
Additional chips | |||||
| Other | |||||
|
| |||||
| Manuf/OEM/ODM | USI | ||||
| Retail | |||||
| FCC approval date | 01 October 2010 | ||||
| (Est.) release date | October 2010 | ||||
| ASIN |
B008GTFGHY | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 | Broadcom BCM4748A1 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11b/g/n | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11g | up to 54 Mbps | ||||
| 802.11b | up to 11 Mbps | ||||
| WiFi Operating Frequency | 2.4 GHz | ||||
| Radio 2 | |||||
| Radio2 module | Broadcom BCM94342EMC | ||||
| Radio2 module IF | Mini PCIe | ||||
| Chip1 | Broadcom BCM4342E | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11a/n | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Meru Networks devices with specifications, see Meru Networks.
Overview
The FCC test report notes the manufacturer as USI [United Scientific Industrial (Shanghai)].
The FCC manual (installation guide) seems to indicate the AP1000 and AP300 SSIDs are Meru.
"MERU Mount Tam" and "DVT2.1" is silkscreened on the main board.
- CPU: Broadcom BCM4748 MIPS 74K WiSoC (2x2 802.11bgn)
- "200-117166-0010G A", the BRCM logo, "BCM94342EMC",
- and "LOG_M11" is silkscreened on the wireless module.
- Broadcom BCM94342EMC - BCM4342E (MAC/PHY/Radio)
- 802.11n 2 Stream Enterprise PCIe Module Full Mini Card
- Both radios are using two Skyworks (SiGe) SE2548A
- (Skyworks SE2548A Dual Band 802.11n FEMs)
Categories:
- Meru Networks
- Embedded system/access point
- Embedded System Broadcom
- Embedded System BCM4748A1
- Broadcom
- Embedded System MIPS 74K
- Embedded System
- Embedded System BCM5481A2
- Manuf USI
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM4342E
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation