Metalink MtW RGPlus 5.0 VB 001

an (A300)
'WLANPlus' Evaluation Kit
WikiDevi.wi-cat.ru	Metalink MtW RGPlus 5.0 VB 001
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Metalink MtW_RGPlus_5.0_VB_001
FCC ID	VT6-237VB-4B, VT6-237VB
Type	access point, bridge
CPU1	Star STR9101
CPU1 Type	ARM FA526 ECONA
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Star STR9101
ETH chip2	IC+ IP101A
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:09:86 Ethernet OUI: 00:09:86
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Additional chips 5GHz Power Amplifier IC;Richwave;RTC6671;582, 6671, A802;2;
Other
Default SSID: Metalink Default IP address: 10.0.1.1 the IP 10.0.1.1 is used by 17 additional devices of which 0 are Metalink devices
Retail
FCC approval date	16 July 2008
Radio 1
Chip1	Metalink MtW8173
Chip2	Metalink MtW8153
Wireless interface OUI	00:09:86
Antenna Connector Type	U.FL
MIMO status	2x3:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Metalink chipsets with specifications, see Lantiq.
For a list of all currently documented Star (Cavium) SoC's with specifications, see Star.

For a list of all currently documented Metalink device with specifications, see Metalink.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class

Overview

The Metalink logo and "GPB-0237C-TW-T3-A1" appears to be silkscreened on the board in the FCC photos.

Default settings (including the SSID) are per the FCC manual.

00:09:86 (Metalink) OUI is per the FCC EUT's MAC label