MikroTik RouterBOARD 931-2nD hAP mini (RB931-2nD)
From TechInfoDepot
				(Redirected from MikroTik RB931-2nD (hAP mini))
				
				Jump to navigationJump to search
				
				| bgn (N300) | |
|---|---|
| access point | |
| Homepage | Product page | 
| 3rd Party Firmware | |
| dd-wrt | Status Unknown | 
| OpenWrt | Was Supported | 
| Tomato any flavor | Incompatible | 
| Gargoyle | Status Unknown | 
| Platform | |
| Brand • Model • Rev | MikroTik RouterBOARD 931-2nD hAP mini | 
| Model Part Number | RB931-2nD | 
| FCC ID | none specified | 
| Type | access point | 
| CPU1  | Qualcomm Atheros QCA9533 | 
| CPU1 Type | MIPS 24Kc | 
| CPU1 Speed | 650 MHz | 
| Flash1 Chip | Brand? Model? | 
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) | 
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | 
| RAM1 Chip | Brand? Model? | 
| ETH chip1 | Qualcomm Atheros QCA9533 | 
| Switch | Qualcomm Atheros QCA9533 | 
| Ethernet Port Count | 3-100MbE-LAN | 
| Wired Standard | IEEE 802.3i/3u | 
| 802dot11 OUI: none specified | |
| Stock bootloader | RouterBOOT | 
| Expansion IF types | none specified | 
| Power | 5 VDC, ? A | 
| Connector type | µUSB | 
|  | |
|  | |
| Other | |
|  | |
| 3rd Party Firmware Support | OpenWrt (Was) | 
| Retail | |
| Availability | End of Life | 
| Radio 1 | |
| Chip1 | Qualcomm Atheros QCA9533 | 
| Wireless interface OUI | none specified | 
| Antenna Connector Type | none specified | 
| MIMO status | 2x2:2 | 
| Wireless Standard | IEEE 802.11b/g/n | 
| 802.11n | up to 300 Mbps | 
| 802.11g | up to 54 Mbps | 
| 802.11b | up to 11 Mbps | 
| WiFi Operating Frequency | 2.4 GHz | 
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented MikroTik devices with specifications, see MikroTik.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
|  | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. | 
Flashing OpenWrt
|  | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. | 
OpenWrt Target: ar71xx
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 19.07.0
Current supported version: EOL
Last Supported Version: 19.07.10
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 19.07.0
Current supported version: EOL
Last Supported Version: 19.07.10
Please insert instructions here
Categories: 
- MikroTik
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9533
- Qualcomm Atheros
- Embedded System MIPS 24Kc
- Embedded System
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation



